METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE METER / GAUGE SYSTEM

    1. Customizing with the Techstream

      1. Connect the Techstream to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the Techstream on.

      4. Enter the following menus: Customize Setting / Combination Meter / Warning.

      5. Select the setting by referring to the table below.

        Note

        • Be sure to record the current value before customizing.

        Warning
        Tester Display Default Content Setting Relevant ECU
        Key Remind Sound Slow Function to change the cycle of the key remind warning buzzer Normal, Slow, Fast Combination meter assembly
        Driver Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
        Rear Seatbelt Warning Buzzer*1 ON Function to turn on/off the rear seat belt warning buzzer ON or OFF Combination meter assembly

        • *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more

    2. Customizing with the combination meter assembly

      Tech Tips

      • Press and hold the DISP switch to enter an item.

      • Briefly press the DISP switch to select an item.

      1. Turn the power switch on (IG).

      2. Select the following menus: SETTINGS.

      3. Select the setting by referring to the table below.

        Note

        • Be sure to record the current value before customizing.

        Settings
        Combination meter assembly display Default Content Setting Relevant ECU
        LANGUAGE ENGLISH Function to change the multi-information display language ENGLISH, FRENCH, SPANISH Combination meter assembly
        ECO INDICATOR ON Function to display/not display the eco indicator and current fuel economy meter ON or OFF Combination meter assembly
        EV INDICATOR ON Function to display/not display the EV indicator ON or OFF Combination meter assembly

      4. Press and hold the DISP switch.

      5. Return to the item selection screen.