ELECTRICAL KEY OSCILLATOR (for Front Floor) INSTALLATION

  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

    1. Connect the connector.

    2. Install the No. 1 indoor electrical key antenna assembly with the bolt.

      Note

      Be careful when installing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.

    3. Engage the clamp.

  2. INSTALL NO. 4 CONSOLE BOX DUCT

    1. Engage the claw to install the No. 4 console box duct.

  3. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY

    1. Connect the connector and engage the clamp.

    2. Engage the 2 guides and 4 clips as shown in the illustration.

      A011WLY

    3. Install the upper console box sub-assembly with the 2 screws.

  4. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY

    1. Connect each connector.

    2. Engage the 4 clips and install the rear console upper panel sub-assembly.

    3. Move the shift lever to P.

  5. INSTALL FRONT PANEL GARNISH RH

    1. Engage the 3 claws, 2 clips and 8 guides to install the front panel garnish RH.

  6. INSTALL FRONT PANEL GARNISH LH

    1. Engage the 3 claws, 2 clips and 8 guides to install the front panel garnish LH.

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    1. Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.

      A011VT8