Tech Tips
Troubleshooting of the theft deterrent system is based on the premise that the power door lock control system and the wireless door lock control system are operating normally. Accordingly, before troubleshooting the theft deterrent system, first make certain that the power door lock control system and the wireless door lock control system are operating normally.
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
|---|---|---|
| Theft deterrent system cannot be set | Engine immobiliser system "security indicator light does not blink" | |
| Front door courtesy switch circuit | ||
| Rear door courtesy switch circuit | ||
| Luggage compartment door courtesy switch circuit | ||
| Front door lock with motor assembly | ||
| Rear door lock with motor assembly | ||
| Luggage compartment door lock assembly | ||
| Engine hood courtesy switch circuit | ||
| Security indicator light does not blink when theft deterrent system is set | Engine immobiliser system "security indicator light does not blink" | |
| Alarm sounding state cannot be canceled when power switch is turned on (IG) | Smart key system (for start function) | |
| Certification ECU (smart key ECU assembly) | - | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Theft deterrent system can be set even when door is open | Front door courtesy switch circuit | |
| Rear door courtesy switch circuit | ||
| Luggage compartment door courtesy switch circuit | ||
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Theft deterrent system can be set even when engine hood is open | Engine hood courtesy switch circuit | |
| Vehicle horns do not sound while theft deterrent system is in warning operation | Horn circuit | |
| Headlights do not blink while theft deterrent system is in warning operation*1 | Low beam headlight circuit | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Taillights do not blink while theft deterrent system is in warning operation*1 | Taillight relay circuit | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Hazard warning lights do not flash while theft deterrent system is in warning operation | Combination meter assembly | - |
| If the symptom(s) still occur after the above areas are inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Interior light does not light up while theft deterrent system is in warning operation*1 | Interior light circuit | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Security horn does not sound while theft deterrent system is in warning operation | Security horn circuit | |
| Headlights blink even when theft deterrent system is not set*1 | Low beam headlight circuit | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Taillights blink even when theft deterrent system is not set*1 | Taillight relay circuit | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Hazard warning lights flash even when theft deterrent system is not set | Combination meter assembly | - |
| If the symptom(s) still occur after the above areas are inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Interior light comes on even when theft deterrent system is not set*1 | Interior light circuit | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) | ||
| Glass breakage sensor does not operate*2 | Adjust the sensitivity volume | |
| Glass breakage sensor circuit |
*1: w/ Daytime Running Light Control
*2: w/ Glass Breakage Sensor