SECURITY HORN ASSEMBLY REMOVAL

  1. REMOVE SPARE WHEEL COVER ASSEMBLY

    1. Remove the spare wheel cover assembly.

  2. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)

    1. Remove the baggage holder net.

  3. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER

    1. Disengage the 8 fasteners.

      A011XNJ

    2. Disengage the 3 claws and remove the luggage compartment front trim cover.

  4. REMOVE REAR FLOOR FINISH PLATE

    1. Remove the 5 clips.

      A011VMU

    2. Disengage the 4 clips and remove the rear floor finish plate.

      A011YD9

  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH

    1. Remove the clip <A>.

      A011X12E01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

    2. Remove the 2 clips <B>.

    3. Disengage the fastener and remove the luggage compartment inner trim cover RH.

  7. REMOVE SECURITY HORN ASSEMBLY

    1. Remove the 2 nuts.

      A011W0J

    2. Disconnect the connector and remove the security horn assembly.