REAR DOOR LOCK INSPECTION

  1. INSPECT REAR DOOR LOCK WITH MOTOR ASSEMBLY LH

    1. Check the operation of the door lock motor.

      A011WARE10

      1. Apply auxiliary battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → Terminal 4 (L)

        Auxiliary battery negative (-) → Terminal 1 (UL)

        		 Locks

        Auxiliary battery positive (+) → Terminal 1 (UL)

        Auxiliary battery negative (-) → Terminal 4 (L)

        		 Unlocks
        Text in Illustration
        *a

        Component without harness connected

        (Rear Door Lock with Motor Assembly LH)
        *b Unlock
        *c Lock

        If the result is not as specified, replace the rear door lock with motor assembly LH.

    2. Check the operation of the unlock detection switch.

      A011WARE11

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (LSSR) - 9 (E) Locked 10 kΩ or higher
        6 (LSSR) - 9 (E) Unlocked Below 1 Ω
        Text in Illustration
        *a

        Component without harness connected

        (Rear Door Lock with Motor Assembly LH)
        *b Unlock
        *c Lock

        If the result is not as specified, replace the rear door lock with motor assembly LH.

  2. INSPECT REAR DOOR LOCK WITH MOTOR ASSEMBLY RH

    1. Check the operation of the door lock motor.

      A011WAME09

      1. Apply auxiliary battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → Terminal 4 (L)

        Auxiliary battery negative (-) → Terminal 1 (UL)

        		 Locks

        Auxiliary battery positive (+) → Terminal 1 (UL)

        Auxiliary battery negative (-) → Terminal 4 (L)

        		 Unlocks
        Text in Illustration
        *a

        Component without harness connected

        (Rear Door Lock with Motor Assembly RH)
        *b Unlock
        *c Lock

        If the result is not as specified, replace the rear door lock with motor assembly RH.

    2. Check the operation of the unlock detection switch.

      A011WAME10

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (LSSR) - 9 (E) Locked 10 kΩ or higher
        6 (LSSR) - 9 (E) Unlocked Below 1 Ω
        Text in Illustration
        *a

        Component without harness connected

        (Rear Door Lock with Motor Assembly RH)
        *b Unlock
        *c Lock

        If the result is not as specified, replace the rear door lock with motor assembly RH.