FRONT DOOR LOCK INSPECTION

  1. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH

    1. Check the operation of the door lock motor.

      A011WGVE21
      1. Apply auxiliary battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → Terminal 4 (L)

        Auxiliary battery negative (-) → Terminal 1 (UL)

        Locks

        Auxiliary battery positive (+) → Terminal 1 (UL)

        Auxiliary battery negative (-) → Terminal 4 (L)

        Unlocks
        Text in Illustration
        *a

        Component without harness connected

        (Front Door Lock with Motor Assembly LH)

        *b Unlock
        *c Lock

        If the result is not as specified, replace the front door lock with motor assembly LH.

    2. Check the operation of the door unlock detection switch.

      A011WGVE22
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        7 (E) - 8 (LSSR) Unlocked Below 1 Ω
        Text in Illustration
        *a

        Component without harness connected

        (Front Door Lock with Motor Assembly LH)

        *b Unlock
        *c Lock

        If the result is not as specified, replace the front door lock with motor assembly LH.

    3. Check the operation of the door key lock and unlock switch.

      A011VMWE01
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        9 (L) - 7 (E) Held to lock side Below 1 Ω
        9 (L) - 7 (E) Neutral or held to unlock side 10 kΩ or higher
        10 (UL) - 7 (E) Held to unlock side Below 1 Ω
        10 (UL) - 7 (E) Neutral or held to lock side 10 kΩ or higher
        Text in Illustration
        *a

        Component without harness connected

        (Front Door Lock with Motor Assembly LH)

        *b Unlock
        *c Lock

        If the result is not as specified, replace the front door lock with motor assembly LH.

  2. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH

    1. Check the operation of the door lock motor.

      A011VGJE23
      1. Apply auxiliary battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → Terminal 4 (L)

        Auxiliary battery negative (-) → Terminal 1 (UL)

        Locks

        Auxiliary battery positive (+) → Terminal 1 (UL)

        Auxiliary battery negative (-) → Terminal 4 (L)

        Unlocks
        Text in Illustration
        *a

        Component without harness connected

        (Front Door Lock with Motor Assembly RH)

        *b Unlock
        *c Lock

        If the result is not as specified, replace the front door lock with motor assembly RH.

    2. Check the operation of the door unlock detection switch.

      A011X5OE01
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlocked Below 1 Ω
        Text in Illustration
        *a

        Component without harness connected

        (Front Door Lock with Motor Assembly RH)

        *b Unlock
        *c Lock

        If the result is not as specified, replace the front door lock with motor assembly RH.