DOOR CONTROL TRANSMITTER INSTALLATION

  1. INSTALL TRANSMITTER BATTERY

    1. for Type A:

      1. Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        A011W4Z

        Note

        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. Install the transmitter housing cover by pressing down on it as shown in the illustration.

        A011XW1

      3. Insert the mechanical key into the transmitter.

        A011XWQ

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.

    2. for Type B:

      1. Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        A011VCT

        Note

        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. Engage the 2 claws and install the cover.

        A011WIA

      3. Install the transmitter housing cover by pressing down on it as shown in the illustration.

        A011XW1

      4. Insert the mechanical key into the transmitter.

        A011XWQ

      5. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.