BLIND SPOT MONITOR SENSOR REMOVAL

  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH

    1. Disengage the 2 clamps.

      A011XN2

    2. Remove the 3 nuts.

      A011Y6F

    3. Disconnect the connector to remove the blind spot monitor sensor LH.

      A011W4F

      Note

      Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH

    1. Disengage the clamp.

      A011YGJ

    2. Remove the 3 nuts.

      A011Y7E

    3. Disconnect the connector to remove the blind spot monitor sensor RH.

      A011WMM

      Note

      Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.

  4. REMOVE BLIND SPOT MONITOR COVER LH

    1. Remove the 2 nuts.

      A011WEV

    2. Disengage the claw to remove the blind spot monitor cover LH.

  5. REMOVE BLIND SPOT MONITOR COVER RH

    Tech Tips

    Use the same procedure as for the LH side.