CHARGING SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

  1. VEHICLE BROUGHT TO WORKSHOP

    NEXT

  2. CONFIRM PROBLEM SYMPTOMS

    NEXT

  3. CUSTOMER PROBLEM ANALYSIS

    1. Check if the vehicle has been jump started due to a discharged auxiliary battery.

      Result
      Result Proceed to
      The vehicle has never been jump started. A
      The vehicle has been jump started due to a discharged auxiliary battery. B
      B

      GO TO ON-VEHICLE INSPECTION / CHECK AUXILIARY BATTERY VOLTAGE Click here

      A

  4. CAN COMMUNICATION SYSTEM CHECK

    1. Using the Techstream, display the CAN Bus Check screen and check that all ECUs and sensors that are connected to CAN communication system are displayed on the screen.

      NG

      GO TO CAN COMMUNICATION SYSTEM Click here.
      OK

  5. CHECK FOR DTCS

    Result
    Result Proceed to
    DTC is output A
    DTC is not output B
    A

    GO TO DTC CHART
    B

  6. ON-VEHICLE INSPECTION

    Result
    Result Proceed to
    Malfunctioning area has been determined A
    Malfunctioning area has not been determined B
    A

    GO TO STEP 8
    B

  7. CHECK FOR INTERMITTENT PROBLEMS

    NEXT

  8. REPAIR OR REPLACE

    NEXT
    END