ULTRASONIC SENSOR (for Rear Side) INSTALLATION

  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

    1. Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the rear bumper assembly.

      A011WY4E01
      Text in Illustration
      *A LH Side
      *B Other Side
      *a Keyhole
      *b Snap

      Note

      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  2. INSTALL NO. 1 ULTRASONIC SENSOR

    1. Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      A011XLJE01
      Text in Illustration
      *A LH Side
      *B Other Side

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

  3. INSTALL ULTRASONIC SENSOR CLIP

    1. Engage the 4 claws to install the ultrasonic sensor clip.

      A011XOWE01
      Text in Illustration
      *A LH Side
      *B Other Side

    2. Engage the clamp.

      A011WSLE01
      Text in Illustration
      *A LH Side
      *B Other Side

    3. Connect the connector.

  4. INSTALL REAR BUMPER ASSEMBLY

    Click here