NAVIGATION ECU REMOVAL

  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE BOX BOTTOM MAT

    1. Remove the box bottom mat.

      A011WK9

  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    1. Remove the 2 screws <D> or <E>.

      A011YQW

    2. Disengage the 4 clips and guide as shown in the illustration.

      A011XTM

    3. Disconnect each connector to remove the upper console panel sub-assembly.

  4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    1. Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

      A011YA5

    2. Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

      A011YX8

    3. Disengage the 3 claws and 2 clips as shown in the illustration.

      A011W28

    4. Disengage the clamp.

      A011XD5

    5. Disconnect the connector to remove the center instrument cluster finish panel assembly.

  5. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    1. Pull the No. 2 instrument panel register assembly in the direction indicated by the arrow to disengage the 6 clips to remove the No. 2 instrument panel register assembly.

      A011XE5

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY

    1. Apply protective tape to the areas shown in the illustration.

      A011YDHE01
      Text in Illustration
      *1 Protective Tape

    2. Remove the 4 bolts.

      A011WRT

    3. Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 8 clips.

      A011VJQ

    4. Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.

      Tech Tips

      w/ Navigation System:

      Do not disconnect the extension module connector.

  7. REMOVE NO. 1 RADIO BRACKET

    1. w/o Navigation System:

      1. Remove the 5 screws and No. 1 radio bracket.

        A011WRF

    2. w/ Navigation System:

      1. Remove the 7 screws and No. 1 radio bracket.

        A011W10

  8. REMOVE NO. 2 RADIO BRACKET

    1. w/o Navigation System:

      1. Remove the 5 screws and No. 2 radio bracket.

        A011XUO

    2. w/ Navigation System:

      1. Remove the 7 screws and No. 2 radio bracket.

        A011Y6I

  9. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

    1. Disengage the 4 clips and guide, and remove the air conditioning control assembly as shown in the illustration.

      A011Z2P

  10. REMOVE EXTENSION MODULE

    1. Disconnect the 3 connectors to remove the navigation wire.

      A011X0U

    2. Disconnect the connector to remove the extension module.

      A011W25