DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15C0 | Navigation antenna error |
|
| B15C1 | Error of the power source to the navigation antenna |
INSPECTION PROCEDURE
Note
After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).
PROCEDURE
CHECK CONNECTION OF NAVIGATION ANTENNA CORD
Check if the navigation antenna cord is securely connected to the extension module.
| OK |
|---|
| Navigation antenna cord is securely connected. |
| NG |
|
SECURELY CONNECT NAVIGATION ANTENNA CORD |
| OK |
|
REPLACE NAVIGATION ANTENNA ASSEMBLY
Replace the navigation antenna assembly with a known good one and check if the same DTC is output again Click here.
Clear the DTCs Click here.
Recheck for DTCs and check if the same DTC is output again.
| OK |
|---|
| No DTCs are output. |
| NG |
|
REPLACE EXTENSION MODULE Click here |
| OK |
|
END