STEERING PAD SWITCH INSTALLATION

  1. INSTALL STEERING PAD SWITCH LH (w/o Steering Pad Switch RH)

    1. Engage the claw and 2 pins to install the steering pad switch LH to the steering wheel sub-assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. Connect the steering pad switch connector to the spiral cable sub-assembly.

    4. Pass the wire harness over the guide.

      A011VHA

  2. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch RH)

    1. Engage the claw and 2 pins to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. Engage the claw and 2 pins to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.

    4. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    5. Connect the steering pad switch connector to the spiral cable sub-assembly.

    6. Pass the wire harness over the 2 guides.

      A011WNQ

  3. INSTALL HORN BUTTON ASSEMBLY

    Click here