STEERING WHEEL REMOVAL

Note

  • Do not replace the spiral cable with sensor sub-assembly with the auxiliary battery connected and the power switch on (IG).

  • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the auxiliary battery connected and the power switch on (IG).

  • Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.

  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY

    1. Remove the steering wheel assembly set nut.

      A011VK4E01
      Text in Illustration
      *a Matchmark

    2. Put matchmarks on the steering wheel assembly and steering main shaft.

    3. Disconnect the connectors from the spiral cable sub-assembly.

    4. Using SST, remove the steering wheel assembly.

      A011Y94E01
      Text in Illustration
      *a Turn
      *b Hold
      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05070 )

      Note

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  4. REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch RH)

    1. Remove the 2 screws.

      A011WI9

    2. Disengage the claw and 2 pins to remove the No. 1 steering wheel ornament from the steering wheel sub-assembly.

  5. REMOVE STEERING PAD SWITCH LH (w/o Steering Pad Switch RH)

    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.

    2. Remove the 2 screws.

      A011WCS

    3. Disengage the claw and 2 pins to remove the steering pad switch LH from the steering wheel sub-assembly.

  6. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch RH)

    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.

    2. Remove the 2 screws.

      A011XP8

    3. Disengage the claw and 2 pins to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.

    4. Remove the 2 screws.

      A011WCS

    5. Disengage the claw and 2 pins to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.

  7. REMOVE CRUISE CONTROL MAIN SWITCH

    1. Remove the 2 screws.

      A011VOO

    2. Disconnect the connector and remove the cruise control main switch.

      A011W5L

  8. REMOVE CRUISE CONTROL SWITCH WIRE

    1. Remove the cruise control switch wire.

  9. REMOVE STEERING SHAKE DAMPER

    1. Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.

      A011XCI