PARKING BRAKE SWITCH INSPECTION

  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY

    1. Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

      A011WFAE06
      Text in Illustration
      *1 Terminal
      *2 Nut
      *a ON
      *b OFF
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      Terminal - Nut On (When shaft is not pressed) Below 1 Ω
      Terminal - Nut Off (When shaft is pressed) 10 kΩ or higher

      If the value is not as specified, replace the parking brake switch assembly.