BRAKE BOOSTER PUMP DISPOSAL

  1. DISPOSE OF BRAKE BOOSTER PUMP ASSEMBLY

    1. Remove the accumulator from the brake booster pump assembly.

    2. Secure the accumulator in a vise.

    3. Using a hacksaw, make a cut in the side of the accumulator at location [A] to release the high-pressure gas.

      A011Z40E01
      Point Area
      A 25 mm (0.984 in.)
      B 60 mm (2.362 in.)

      CAUTION:

      Small pieces of metal may fly out when cutting into the accumulator. Put a cloth over the hacksaw when cutting the accumulator. Cut the accumulator slowly so that the gas will be released gradually.

      Tech Tips

      The gas is colorless, odorless and non-poisonous.