FRONT LOWER BALL JOINT INSTALLATION

Tech Tips

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  1. INSTALL FRONT LOWER BALL JOINT ASSEMBLY

    1. Secure the front axle assembly in a vise using aluminum plates.

      Note

      When using a vise, do not overtighten it.

    2. Install the front lower ball joint assembly to the front axle assembly with a new nut.

      Torque:
      123 N*m  { 1254 kgf*cm, 91 ft.*lbf }

      Note

      Prevent oil from adhering to the threaded and tapered parts.

    3. Install a new cotter pin.

      Note

      Further tighten the nut up to 60° if the holes for the cotter pin are not aligned.

  2. INSTALL FRONT AXLE ASSEMBLY

    Click here