TIRE PRESSURE WARNING VALVE REMOVAL

  1. REMOVE FRONT WHEEL

  2. REMOVE REAR WHEEL

  3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER

    1. Remove the cap and valve core to release the air from the tire.

      Note

      Keep the removed cap.

    2. After ensuring that a sufficient amount of air has been released, remove the nut and washer used to secure the tire pressure warning valve and transmitter. Drop the tire pressure warning valve and transmitter with grommet into the tire.

      Tech Tips

      The grommet may remain attached to the rim.

    3. After dropping the tire pressure warning valve and transmitter with grommet into the tire, disengage the bead using the shoe of a tire remover.

      A011XUME02
      Text in Illustration
      *1 Tire
      *2 Shoe

      Note

      • Be careful not to damage the tire pressure warning valve and transmitter due to interference between the valve and the tire bead.

      • Set the tire remover shoe as shown in the illustration.

        Width (A)
        10 to 20 mm (0.394 to 0.787 in.)

    4. Separate the upper bead.

    5. Take out the tire pressure warning valve and transmitter with grommet from the tire and separate the lower bead.

    6. Remove the grommet from the tire pressure warning valve and transmitter.