TIRE AND WHEEL SYSTEM INSPECTION

  1. INSPECT TIRES

    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)

      P205/65R16 94S

      P215/55R17 93V

      		 240 (2.4, 35)

    2. Using a dial indicator, check the runout of the tires.

      A011XMF
      Maximum tire runout
      1.4 mm (0.0551 in.)

  2. ROTATE TIRES

    1. Rotate the tires as shown in illustration.

      A011WQD
      Text in Illustration
      A011YFS Front
      Torque:
      Axle hub nut
      103 N*m  { 1049 kgf*cm, 76 ft.*lbf }

  3. INSPECT AND ADJUST WHEEL BALANCE

    1. Inspect and adjust the off-the-car balance.

      1. Steel wheel:

        Maximum imbalance
        8.0 g (0.0176 lb)

      2. Others (Non-steel wheel):

        A011VSKE06
        Maximum imbalance
        8.0 g (0.0176 lb)

        Note

        • Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.

        • Do not touch the adhesive surface of the tape.

        • Adhere a sticking type balance weight to the flat surface (A) shown in the illustration.

          Width (A)
          25 mm (0.984 in.)

        • Push the balance weight securely with your finger to adhere it to the desired position.

        • Do not reuse balance weights.

        Tech Tips

        The inner side balance weight should be installed by clipping it to the rim.

  4. INSPECT FRONT AXLE HUB BEARING

    Click here

  5. INSPECT REAR AXLE HUB BEARING

    Click here