SHIFT LEVER POSITION SENSOR REMOVAL

  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  2. REMOVE ENGINE UNDER COVER LH

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  4. REMOVE ENGINE UNDER COVER RH

  5. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY

    1. Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

      A011WV2

    2. Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with clip from the No. 1 transmission control cable bracket.

    3. Remove the clip from the transmission control cable assembly.

  6. REMOVE SHIFT LEVER POSITION SENSOR

    1. Disconnect the connector from the shift lever position sensor.

      A011YU9

    2. Remove the nut, washer, and control shaft lever from the manual valve shaft.

      A011WFY

    3. Using a screwdriver, pry the tabs of the lock plate.

      A011W98E01
      Text in Illustration
      *1 Lock Plate

    4. Remove the lock nut and lock plate from the manual valve shaft.

      A011Z0ME01
      Text in Illustration
      *1 Lock Nut
      *2 Lock Plate

    5. Remove the 2 bolts and pull out the shift lever position sensor from the manual valve shaft.

      A011YZU