PURGE VALVE REMOVAL

  1. REMOVE PURGE VSV

    1. Disconnect the connector and wire harness clamp.

      A011YGA

    2. Disconnect the 2 fuel vapor feed hoses.

      A011VTWE01
      Text in Illustration
      *1 Retainer
      *2 Fuel Tube Connector
      *3 Pipe
      *4 O-ring
      *a Pinch
      *b Pull

      Note

      • Remove any dirt or foreign matter on the fuel tube connector before performing this work.

      • Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the fuel tube connector has an O-ring that seals the pipe.

      • Perform this work by hand. Do not use any tools.

      • Protect the disconnected parts by covering them with plastic bags after disconnecting each fuel vapor feed hose.

    3. Remove the purge VSV from the No. 1 air cleaner hose.

    4. Remove the fuel vapor feed hose from the purge VSV.

      A011YTB