CYLINDER HEAD DISASSEMBLY

  1. REMOVE INTAKE VALVE

    1. Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

      A011W7XE01
      SST
      09202-70020   ( 09202-00010 )

    2. Remove the valve spring retainer, compression spring and intake valve.

      Tech Tips

      Arrange the removed parts in the correct order.

  2. REMOVE EXHAUST VALVE

    1. Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

      A011Y6UE01
      SST
      09202-70020   ( 09202-00010 )

    2. Remove the valve spring retainer, compression spring and exhaust valve.

      Tech Tips

      Arrange the removed parts in the correct order.

  3. REMOVE VALVE STEM OIL SEAL

    1. Using needle-nose pliers, remove the valve stem oil seal.

      A011WSX

  4. REMOVE VALVE SPRING SEAT

    1. Using compressed air and a Magnet Hand, remove the valve spring seat by blowing air onto it.

      A011VP3

  5. REMOVE NO. 1 STRAIGHT SCREW PLUG

    Note

    If water leaks from the No. 1 straight screw plug or the plug is corroded, replace it.

    A011WSR

    1. Using a 10 mm hexagon wrench, remove the 3 No. 1 straight screw plugs and 3 gaskets.

  6. REMOVE NO. 2 STRAIGHT SCREW PLUG

    Note

    If water leaks from the No. 2 straight screw plug or the plug is corroded, replace it.

    A011YKQ

    1. Using a 14 mm hexagon wrench, remove the No. 2 straight screw plug and gasket.

  7. REMOVE CYLINDER HEAD STUD BOLT

    Note

    If a stud bolt is deformed or its threads are damaged, replace it.

    1. Using an E7 "TORX" socket wrench, remove the 5 cylinder head stud bolts.

      A011Z25