REAR CRANKSHAFT OIL SEAL REMOVAL

  1. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION INPUT DAMPER ASSEMBLY

    1. Using SST, hold the crankshaft pulley.

      A011WGUE04
      SST
      09213-54015
      09330-00021
      91551-80650

    2. Remove the 6 bolts and transmission input damper assembly.

      A011Z6R

  3. REMOVE FLYWHEEL SUB-ASSEMBLY

    1. Using SST, hold the crankshaft pulley.

      A011WGUE04
      SST
      09213-54015
      09330-00021
      91551-80650

    2. Remove the 8 bolts and flywheel sub-assembly.

      A011WMJ

  4. REMOVE REAR ENGINE OIL SEAL

    1. Using a knife, cut off the lip of the oil seal.

      A011XMBE04
      Text in Illustration
      *1 Cut Position

    2. Using a screwdriver, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.