IGNITION COIL AND SPARK PLUG REMOVAL

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    1. Lift the rear of the engine cover to detach the cover from the 2 pins, and then lift the front of the engine cover to detach the cover from the pin and remove the No. 1 engine cover sub-assembly.

      A011WEI

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE IGNITION COIL ASSEMBLY

    1. Disconnect the 4 ignition coil assembly connectors.

      A011Z6T

    2. Remove the 4 bolts and 4 ignition coil assemblies.

      A011WBL

  3. REMOVE SPARK PLUG

    1. Using a spark plug wrench, remove the 4 spark plugs.

      A011X2B