NAME PLATE REMOVAL

Tech Tips

When removing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.

  1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM

    1. Put protective tape around the luggage compartment door emblem.

      A011W8EE01
      Text in Illustration
      *1 Protective Tape

    2. Using a moulding remover, separate the double-sided tape and disengage the 2 pins to remove the luggage compartment door emblem.

      Note

      • If reusing the luggage compartment door emblem, take care not to damage the symbol emblem.

      • Be careful not to damage the vehicle body.

  2. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. Put protective tape around the No. 2 luggage compartment door name plate.

      A011Y05E01
      Text in Illustration
      *1 Wooden Block
      *2 Piano Wire
      *3 Protective Tape

    2. Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire to separate the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

      Note

      • If reusing the No. 2 luggage compartment door name plate, take care not to damage the No. 2 luggage compartment door name plate.

      • Be careful not to damage the vehicle body.

    5. Remove the No. 2 luggage compartment door name plate.

  3. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. Put protective tape around the No. 3 luggage compartment door name plate.

      A011VMME01
      Text in Illustration
      *1 Wooden Block
      *2 Piano Wire
      *3 Protective Tape

    2. Insert a piano wire between the vehicle body and No. 3 luggage compartment door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire to separate the double-sided tape that holds the No. 3 luggage compartment door name plate to the vehicle body.

      Note

      • If reusing the No. 3 luggage compartment door name plate, take care not to damage the No. 3 luggage compartment door name plate.

      • Be careful not to damage the vehicle body.

    5. Remove the No. 3 luggage compartment door name plate.

  4. REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. Put protective tape around the No. 1 luggage compartment door name plate.

      A011YREE01
      Text in Illustration
      *1 Wooden Block
      *2 Piano Wire
      *3 Protective Tape

    2. Insert a piano wire between the vehicle body and No. 1 luggage compartment door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and cut the double-sided tape that holds the No. 1 luggage compartment door name plate to the vehicle body.

      Note

      • If reusing the No. 1 luggage compartment door name plate, take care not to damage the No. 1 luggage compartment door name plate.

      • Be careful not to damage the vehicle body.

    5. Remove the No. 1 luggage compartment door name plate.

  5. REMOVE SIDE PANEL EMBLEM (for LH Side)

    1. Put protective tape around the side panel emblem.

      A011YQ5E01
      Text in Illustration
      *1 Wooden Block
      *2 Piano Wire
      *3 Protective Tape

    2. Insert a piano wire between the vehicle body and side panel emblem.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body.

      Note

      • If reusing the side panel emblem, take care not to damage the side panel emblem.

      • Be careful not to damage the vehicle body.

    5. Remove the side panel emblem.

  6. REMOVE SIDE PANEL EMBLEM (for RH Side)

    1. Put protective tape around the side panel emblem.

      A011WO7E01
      Text in Illustration
      *1 Wooden Block
      *2 Piano Wire
      *3 Protective Tape

    2. Insert a piano wire between the vehicle body and side panel emblem.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body.

      Note

      • If reusing the side panel emblem, take care not to damage the side panel emblem.

      • Be careful not to damage the vehicle body.

    5. Remove the side panel emblem.