REAR SPOILER INSTALLATION

INSTALL NO. 3 REAR SPOILER PROTECTOR

1. Clean the rear spoiler.

   1. Remove any double-sided tape from the rear spoiler.

   2. Wipe off any tape adhesive residue with cleaner.

2. Install 2 new No. 3 rear spoiler protectors.

   1. Remove the release paper from the 2 No. 3 rear spoiler protectors.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   2. Install 2 new No. 3 rear spoiler protectors.

INSTALL NO. 4 REAR SPOILER PROTECTOR

1. Clean the rear spoiler.

   1. Remove any double-sided tape from the rear spoiler.

   2. Wipe off any tape adhesive residue with cleaner.

2. Install 2 new No. 4 rear spoiler protectors.

   1. Remove the release paper from the 2 No. 4 rear spoiler protectors.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   2. Install 2 new No. 4 rear spoiler protectors as shown in the illustration.

      

      Standard Measurement

      Dimension	Measurement	Dimension	Measurement
      A	5.2 mm (0.205 in.)	B	5.2 mm (0.205 in.)

INSTALL NO. 5 REAR SPOILER PROTECTOR

1. Clean the rear spoiler.

   1. Remove any double-sided tape from the rear spoiler.

   2. Wipe off any tape adhesive residue with cleaner.

2. Install 2 new No. 5 rear spoiler protectors.

   1. Remove the release paper from the 2 No. 5 rear spoiler protectors.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   2. Install 2 new No. 5 rear spoiler protectors as shown in the illustration.

      

      Standard Measurement

      Dimension	Measurement	Dimension	Measurement
      A	38.0 mm (1.50 in.)	B	38.0 mm (1.50 in.)

INSTALL REAR SPOILER SUB-ASSEMBLY

1. When replacing the rear spoiler with a new one:

   1. Install the 2 stud bolts to the rear spoiler.

2. Install 2 new gaskets to the rear spoiler.

3. Install 4 new clips to the rear spoiler.

4. Clean the rear spoiler.

   1. Remove any double-sided tape from the rear spoiler.

   2. Wipe off any tape adhesive residue with cleaner.

5. Install a new No. 2 rear spoiler protector.

   1. Remove the release paper from the No. 2 rear spoiler protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   2. Install a new No. 2 rear spoiler protector.

      Tech Tips

      Use the same procedure for the RH side and LH side.

6. Install the No. 1 rear spoiler protector.

   1. Remove the release paper from the No. 1 rear spoiler protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   2. Install the No. 1 rear spoiler protector as shown in the illustration.

      

      Standard Measurement

      Dimension	Measurement	Dimension	Measurement
      A	5.0 mm (0.197 in.)	B	5.0 mm (0.197 in.)

7. Clean the vehicle body surface.

   1. Using a heat light, heat the vehicle body surface.

   2. Remove the double-sided tape from the vehicle body.

   3. Wipe off any tape adhesive residue with cleaner.

8. Install the rear spoiler sub-assembly.

   1. Using a heat light, heat the vehicle body and rear spoiler sub-assembly.

   2. Remove the release paper from the rear spoiler sub-assembly.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   3. Engage the 4 clips.

      

   4. Install the rear spoiler sub-assembly with the 2 nuts.