FRONT BUMPER REASSEMBLY

  1. INSTALL FRONT BUMPER SIDE RETAINER LH

    1. Engage the claw.

      A011YDF

    2. Install the front bumper side retainer LH with the bolt.

      Torque:
      4.1 N*m  { 42 kgf*cm, 36 in.*lbf }

  2. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

    1. Install the front bumper reinforcement sub-assembly with the 6 bolts.

      A011X86
      Torque:
      61 N*m  { 622 kgf*cm, 45 ft.*lbf }

    2. Engage the 5 clamps.

  4. INSTALL FRONT BUMPER ENERGY ABSORBER

    1. Engage the 2 guides to install the front bumper energy absorber.

      A011XFH

  5. INSTALL NO. 1 LOWER RADIATOR GRILLE

    1. Engage the 2 guides and 16 claws to install the No. 1 lower radiator grille.

      A011XYC

  6. INSTALL FRONT BUMPER HOLE COVER LH

    1. w/ Fog Light:

      1. Engage the 2 claws and 2 guides to install the fog light mounting bracket LH.

        A011Z10

    2. Engage the 5 claws to install the front bumper hole cover LH.

      A011WJB

  7. INSTALL FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. INSTALL FRONT FENDER LINER RETAINER

    1. Engage the claw to install the front fender liner retainer.

      A011XQN

      Tech Tips

      Use the same procedure for the RH side and LH side.

  9. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET

    1. w/o Side Turn Signal Light:

      1. Engage the 2 hooks.

        A011XVQE01
        Text in Illustration
        *1 Hook

      2. Install the front bumper extension mounting bracket with the 2 screws.

    2. w/ Side Turn Signal Light:

      1. Engage the 2 hooks.

        A011XR4E01
        Text in Illustration
        *1 Hook

      2. Install the front bumper extension mounting bracket with the 2 screws.

  10. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    1. Engage the 2 guides to temporarily install the fog light assembly.

    2. Install the fog light assembly with the screw.

      Torque:
      1.6 N*m  { 16 kgf*cm, 14 in.*lbf }

  11. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  12. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

    1. Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      A011WY4E01
      Text in Illustration
      *A LH Side
      *B RH Side
      *a Keyhole
      *b Snap

      Note

      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  13. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

    1. Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      A011XLJE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.