FRONT BUMPER REMOVAL

  1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

    Click here

  2. REMOVE FRONT BUMPER ASSEMBLY

    1. Put protective tape around the front bumper assembly.

      A011XX7E01
      Text in Illustration
      *1 Protective Tape

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. Using a screwdriver, turn the pins 90 degrees and remove the pin hold clip.

      A011WJ4E01
      Text in Illustration
      *1 Pin Hold Clip

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. Remove the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Remove the 6 screws.

      A011VQ4

    5. Disengage the 3 claws.

      A011XHC

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. Pull back the side of the front bumper assembly as shown in the illustration and disconnect each connector.

      A011WYGE01
      Text in Illustration
      *A w/ Intuitive Parking Assist System
      *B w/ Fog Light

      Note

      Do not apply excessive force when separating the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. Using a clip remover, remove the 3 clips.

      A011WRU

    8. Remove the front bumper assembly.