HEADLIGHT LEVELING SWITCH INSPECTION

  1. INSPECT HEADLIGHT LEVELING SWITCH

    1. Voltage Check

      1. Connect a positive (+) lead from the auxiliary battery to terminal 1 (B) and a negative (-) lead to terminal 5 (E).

        A011W8WE03

      2. Measure the voltage according to the value(s) in the table below.

        Standard Voltage
        Tester Connection Switch Position Specified Condition
        2 (T) - 5 (E) 0 10.44 to 11.16 V
        1 9.16 to 9.88 V
        2 7.88 to 8.60 V
        3 6.6 to 7.32 V
        4 5.32 to 6.04 V
        5 4.04 to 4.76 V

        Tech Tips

        Auxiliary battery voltage is 12 V.

        Text in Illustration
        *a

        Component without harness connected

        (Headlight Leveling Switch)

        If the result is not as specified, replace the headlight leveling switch.

    2. LED Illumination Inspection

      A011W8WE02

      1. Apply auxiliary battery voltage to the headlight leveling switch and check that the switch illuminates.

        OK
        Tester Connection Specified Condition

        Auxiliary battery positive (+) → Terminal 3 (ILL+)

        Auxiliary battery negative (-) → Terminal 4 (ILL-)

        		 Illuminates
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Leveling Switch)

        If the result is not as specified, replace the headlight leveling switch.