REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

Tech Tips

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

    1. Install the rear combination light assembly with the 4 nuts.

      Torque:
      4.1 N*m  { 42 kgf*cm, 36 in.*lbf }

    2. Engage the clamp.

    3. Connect each connector.

  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER

    1. Install the clip <A>.

      A011WWBE01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

    2. Install the 2 clips <B>.

    3. Engage the fastener and install the luggage compartment inner trim cover LH.

  3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    1. Engage the pin to install the No. 1 luggage compartment trim hook.

      A011WDNE01
      Text in Illustration
      *1 Pin

  4. INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER

    1. Engage the 2 claws.

    2. Engage the 8 fasteners and install the luggage compartment front trim cover.

  5. INSTALL REAR FLOOR FINISH PLATE

    1. Engage the 4 clips and install the rear floor finish plate.

      A011YQE

    2. Install the 5 clips.

  6. INSTALL BAGGAGE HOLDER NET (w/ Partition Net)

    1. Install the baggage holder net.

  7. INSTALL SPARE WHEEL COVER ASSEMBLY

    1. Install the spare wheel cover assembly.

  8. INSTALL REAR BUMPER ASSEMBLY

    Click here