AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM DTC CHECK / CLEAR

  1. CHECK DTC

    1. Connect the Techstream to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / HL Auto Leveling / Trouble Codes.

    5. Check for DTCs.

  2. CLEAR DTC

    1. Connect the Techstream to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / HL Auto Leveling / Trouble Codes.

    5. Clear the DTCs.