WIPER AND WASHER SYSTEM PRECAUTION

  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected:

    System See Procedure
    Parking Assist Monitor System

    Click here

  2. PRECAUTION OF WASHER NOZZLE ADJUSTMENT

    1. Do not clean or adjust the washer nozzle with a safety pin, etc. because;

      1. the washer nozzle tip is made of resin and could be damaged.

      2. adjustment is not necessary because the washer nozzle is a spray type. If it is necessary to change the nozzle angle, replace the washer nozzle with one that has a different nozzle angle. Click here

    2. If the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush, etc.