WASHER NOZZLE ADJUSTMENT

  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY

    1. Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      A011XA2E03
      Text in Illustration
      *1 Protective Tape

      Note

      Be careful not to damage the windshield.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the washer nozzle sub-assembly from the washer hose.

      A011WJ3

      Note

      Washer nozzles cannot be reused.

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY

    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

      A011Y0ZE05
      Text in Illustration
      *a Washer Fluid Spray Angle *b Part Number

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY

    1. Connect a new washer nozzle sub-assembly to the washer hose.

    2. Engage the 2 claws to install the washer nozzle sub-assembly as shown in the illustration.

      A011W5AE03