REAR POWER OUTLET SOCKET REMOVAL

  1. REMOVE FRONT PANEL GARNISH LH

    1. Disengage the 3 claws, 2 clips and 8 guides to remove the front panel garnish LH.

      A011YNG

  2. REMOVE FRONT PANEL GARNISH RH

    1. Disengage the 3 claws, 2 clips and 8 guides to remove the front panel garnish RH.

      A011X5F

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    1. Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

      A011XO8

  4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY

    1. Open the upper console panel sub-assembly door.

    2. Move the shift lever to N.

    3. Disengage the 4 clips.

      A011W2O

    4. Disconnect each connector and remove the rear console upper panel sub-assembly.

  5. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY

    1. Remove the 2 screws.

      A011VX0

    2. Disengage the 4 clips and 2 guides remove the upper console box sub-assembly as shown in the illustration.

      A011XIX

    3. Disengage the clamp.

      A011X8H

    4. Disconnect the connector to remove the upper console box sub-assembly.

  6. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY

    1. Turn the No. 3 power outlet socket assembly in the direction shown in the illustration to disengage the claw.

      A011XRE

    2. Using a screwdriver, disengage the claw, and then push in the No. 3 power outlet socket assembly until the protrusion of the No. 3 power outlet socket assembly comes into contact with the No. 2 power outlet socket cover.

      A011X44

    3. As shown in the illustration, align the protrusion of the No. 3 power outlet socket assembly and the notch of the No. 2 power outlet socket cover.

      A011VTU

    4. Using a screwdriver, disengage the claw and remove the No. 3 power outlet socket assembly from the No. 2 power outlet socket cover.

      A011XCR

  7. REMOVE NO. 2 POWER OUTLET SOCKET COVER

    1. Disengage the 2 claws and remove the No. 2 power outlet socket cover.

      A011YWO