PTC HEATER ASSEMBLY INSPECTION

  1. INSPECT QUICK HEATER ASSEMBLY

    1. Measure the resistance according to the value(s) in the table below.

      A011XJFE02
      Standard Resistance
      Tester Connection Condition Specified Condition
      I41-1(B) - a1-1(E) Always Below 1 Ω
      I41-2(B) - a1-1(E) Always Below 1 Ω
      Text in Illustration
      *a

      Component without harness connected

      (Quick Heater Assembly)

      • If the result is not as specified, replace the quick heater assembly.