CONDENSER REASSEMBLY

  1. INSTALL COOLER DRYER

    1. Using pliers, install a new cooler dryer to the modulator.

      A011X9D

    2. Apply a sufficient amount of compressor oil to a new O-ring and the fitting surfaces of the cap.

      A011WZO
      Compressor oil
      ND-OIL 11 or equivalent

    3. Using a 14 mm straight hexagon wrench, install the cap to the modulator.

      A011X0PE01
      Text in Illustration
      *1 14 mm Straight Hexagon Wrench
      Torque:
      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }

      Note

      • Keep the O-ring and O-ring fitting surfaces free from dirt or foreign matter.

      • Do not use any compressor oil other than ND-OIL 11 or equivalent.