PARKING SUPPORT ALERT SYSTEM


  1. CONSTRUCTION


    1. The RCTA buzzer is installed to the rear inside the vehicle. It notifies the driver of vehicles approaching from the rear or pedestrians walking behind.

    2. Sounding of the RCTA buzzer is controlled by the blind spot monitor sensor LH.

      RCTA Buzzer Specification
      Item Specification
      Operation Frequency [kHz] 2.0 +/- 0.04
      Sound Pressure Level [dB]*

      83 + 10

      83 - 3

      Tech Tips

      *: This is the sound pressure level at a position 1 m (3.3 ft.) away from the buzzer itself, not the level where the driver would be sitting (where the sound would actually be heard).

  2. OPERATION


    1. RCTA Buzzer Sounding


      1. When a vehicle is detected approaching from the rear or pedestrians walking behind, the RCTA buzzer sounds as follows.

        B003H03E02
        *1 ON
        *2 OFF
        *3 Cycle