PROPELLER SHAFT SYSTEM


  1. OUTLINE


    1. Front Propeller Shaft (AWD Models)


      1. A 2-joint type front propeller shaft is used.

        B003HJYC02
        *1 Cross Groove Type Joint - -

    2. Rear Propeller Shaft


      1. Flexible coupling joints which combine durability and low rigidity are used before and after the rear propeller shaft.

      2. A double offset joint is used in the center. As a result, sliding back and forth is allowed in order to decrease body shake, muffled sounds and vibrations when starting off.

        Figure 1. 2WD Models

        B003GENC01
        *1 Flexible Coupling Joint *2 Double Offset Joint
        B003GO4 Transmission Side B003GI6 Rear Differential Side

        Figure 2. AWD Models

        B003GENC01
        *1 Flexible Coupling Joint *2 Double Offset Joint
        B003GO4 Transfer Side B003GI6 Rear Differential Side