AIR CONDITIONING SYSTEM


  1. CONSTRUCTION


    1. Air Conditioning Radiator Assembly Side


      1. Cold-Storage (CS) Evaporator (Models with Stop and Start System)


        • The cold storage evaporator is composed of tanks, tubes, cooling fins and cold storage cases.

        • The cold storage cases with built-in cold insulators are structures sandwiched between tubes used as refrigerant passages and can store cold energy in a short amount of time.

          B00567NC01
          *1 Cold Insulator *2 Cold Storage Case
          *3 Tube - -
          *a A - A Cross Section - -

      2. Revolutionary super-Slim (RS) Evaporator (Models without Stop and Start System)


        • A Revolutionary super-slim Structure (RS) type evaporator is used. Placing the tanks at the top and the bottom of the evaporator and using a micropore tube construction provides the following benefits:


          • Improved heat exchange efficiency

          • More uniform temperature distribution

          • A thinner evaporator

            B0056GSC01
            *1 Tank *2 Cooling Fin
            *3 Micropore Tube - -

    2. Rear Cooling Unit Assembly Side (Models with Rear Cooling Unit Assembly)


      1. Revolutionary super-Slim (RS) Evaporator


        • A Revolutionary super-slim Structure (RS) type evaporator is used. Placing the tanks at the top and the bottom of the evaporator and using a micropore tube construction provides the following benefits:


          • Improved heat exchange efficiency

          • More uniform temperature distribution

          • A thinner evaporator

            B005627C01
            *1 Tank *2 Cooling Fin
            *3 Micropore Tube - -