METER / GAUGE SYSTEM


  1. CONSTRUCTION


    1. Multi-information Display


      1. Display Function Flow


        • The multi-information display flow can be switched as shown in the flow chart below:

          Figure 1. Normal Meter

          B0056F2E03
          *A Models with Lexus Safety System +
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d Engine switch is turned on (IG).
          *e Item or display is selected by operating the steering pad switch assembly.

          Figure 2. F-SPORT Meter

          B0056FAE02
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d Engine switch is turned on (IG).
          *e Item or display is selected by operating the steering pad switch assembly.
          *f Back switch is briefly pressed.
          *g Movable meter ring is operated.

          Figure 3. F-SPORT Meter

          B0056L7E03
          *A Models with Lexus Safety System +
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d Odometer is displayed for a certain period of time after the engine switch is turned off.
          *e Item or display is selected by operating the steering pad switch assembly.
          *f Back switch is briefly pressed.
          *g Movable meter ring is operated.

      2. Display Tab Operation


        • When the ring side display mode is selected*, the left and right switches of the steering pad switch assembly can be operated to select display tabs and switch the displayed information.


          • *: F-SPORT Meter

            Figure 4. Normal Meter

            B0056EBC01
            *1 Drive Information *2 Navigation Information
            *3 Audio Information *4 Driving Support System Information
            *5 Warning Message *6 Settings
            *a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
            B0056J1 Left Switch Operation B005637 Right Switch Operation

            Figure 5. F-SPORT Meter (Ring Side Display Mode)

            B0056OPC01
            *1 Drive Information *2 Navigation Information
            *3 Audio Information *4 Driving Support System Information
            *5 Warning Message *6 Settings
            *a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
            B0056J1 Left Switch Operation B005637 Right Switch Operation

      3. Drive Information


        • Drive information shows vehicle information such as drivable range and fuel consumption.

        • The drive information can be switched using the up/down switch on the steering pad switch assembly.

          Figure 6. Normal Meter

          B0056PNC01
          *A Models with Lexus Safety System + - -
          *1 Drive Information 1 *2 Drive Information 2
          *3 Stop and Start System Information *4 ECO Driving Indicator Zone Display
          *5 Tire Inflation Pressure Display *6 Vehicle Sway Warning
          *7 Blank - -
          *a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
          B0056J1 Up Switch Operation B005637 Down Switch Operation

          Figure 7. F-SPORT Meter (Ring Center Display Mode)

          B0056KLC01
          *1 Drive Information 1 *2 Drive Information 2
          *3 Tire Inflation Pressure Display *4 Gear Position Indicator
          *5 Driving Support System Information *6 Blank
          *a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
          B0056J1 Up Switch Operation B005637 Down Switch Operation

          Figure 8. F-SPORT Meter (Ring Side Display Mode)

          B0056EPC01
          *A Models with Lexus Safety System + - -
          *1 Drive Information 1 *2 Drive Information 2
          *3 Stop and Start System Information *4 ECO Driving Indicator Zone Display
          *5 G Monitor *6 Gear Position Indicator
          *7 Vehicle Sway Warning *8 Tire Inflation Pressure Display
          *9 Blank - -
          *a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
          B0056J1 Up Switch Operation B005637 Down Switch Operation

      4. Setting Function


        • The items displayed on the multi-information display or headup display* can be customized.


          • *: Models with headup display


        • The following items can be selected on the information setting screen:

          Lane Keeping Assist (LKA) System *
          Item Available Setting
          Lane Center

          Setting for lane centering function can be set to on/off:


          • On

          • Off
          Steering Assist

          Setting for steering assist can be set to on/off:


          • On

          • Off
          Warning Method

          Warning method can be changed:


          • Steering wheel vibration (Icon is displayed)

          • Buzzer (Icon is displayed)
          Sensitivity

          Alert sensitivity of alert system can be changed:


          • High

          • Standard

          *: Models with LKA system

          Lane Departure Alert (LDA) System*
          Item Available Setting
          Steering Assist

          Setting for steering assist can be set to on/off:


          • On

          • Off
          Warning Method

          Warning method can be changed:


          • Steering wheel vibration (Icon is displayed)

          • Buzzer (Icon is displayed)
          Sensitivity

          Alert sensitivity of alert system can be changed:


          • High

          • Standard

          *: Models with LDA system

          Pre-Collision System (PCS)*
          Item Available Setting
          PCS

          The pre-collision system can be set to on/off:


          • On

          • Off
          Sensitivity

          The pre-collision system sensitivity can be selected:


          • Far (Icon is displayed)

          • Middle (Icon is displayed)

          • Near (Icon is displayed)

          *: Models with Lexus Safety System +

          Blind Spot Monitor (BSM) System*
          Item Available Setting
          BSM

          The blind spot monitor system can be set to on/off:


          • On

          • Off

          *: Models with BSM system

          ParKing Support Alert (PKSA) System
          Item Available Setting
          Lexus Parking Assist-sensor

          The Lexus parking assist-sensor can be set to on/off:


          • On

          • Off
          Rear Crossing Traffic Alert (RCTA)*1

          The RCTA function can be set to on/off:


          • On

          • Off
          Rear Camera Detection (RCD)*2

          The RCD function can be set to on/off:


          • On

          • Off
          Warning Buzzer

          The volume of the warning buzzer can be switched:


          • 1 (Quiet)

          • 2 (Medium)

          • 3 (Loud)

          *1: Models with BSM system

          *2: Models with panoramic view monitor system

          ParKing Support Brake (PKSB) System*
          Item Available Setting
          PKSB System

          The PKSB system can be set to on/off:


          • On

          • Off

          *: Models with PKSB system

          Head-Up Display (HUD) Brightness/Position*
          Item Available Setting
          HUD Brightness/Position

          • The brightness and position of the headup display image can be changed.

          • When changing the brightness of the headup display image, press the left/right switch on the steering pad switch assembly.

          • When changing the position of the headup display image, press the up/down switch on the steering pad switch assembly.

          *: Models with headup display

          Unit Change*
          Item Available Setting
          Unit Change

          The unit displayed can be selected:


          • MPH

          • km/h

          *: Destination package for United Kingdom

          Vehicle Settings
          Item Available Setting
          Sway Warning*1

          Vehicle sway warning can be set to on/off:


          • On

          • Off
          Sway Sensitivity*1

          Vehicle sway warning sensitivity can be selected:


          • High

          • Standard

          • Low
          BSM*2

          • The brightness of the BSM indicator light can be switched:


            • Bright

            • Dim

          • The BSM warning sensitivity level can be switched:


            • Early (Icon is displayed)

            • Middle (Icon is displayed)

            • Later (Icon is displayed)

            • Only blind spots (Icon is displayed)
          RSA*3

          • The road sign assist system can be set to on/off:


            • On

            • Off


          • The excess speed notification method can be selected:


            • No Notification

            • Only Visual

            • Visual and Audible


          • The excess speed notification level can be be selected:


            • 10 km/h (5 mph)

            • 5 km/h (3 mph)

            • 2 km/h (1 mph)


          • The other notifications method can be selected:


            • No Notification

            • Only Visual

            • Visual and Audible
          HUD Driving Support*4

          • The tachometer display area can be switched:


            • Blank

            • ECO Driving Indicator Zone Display

            • Tachometer


          • The HUD display contents can be set to on/off:


            • Navigation*5

            • Driving Assist

            • Compass

            • Audio


          • The angle of the HUD display can be corrected in the rotational direction:


            • Counterclockwise

            • Clockwise
          Stop and Start System

          The idling stop time of stop and start system can be selected:


          • Standard

          • Extended
          Air Suspension System*6

          • The vehicle height control can be set to on/off:


            • On

            • Off


          • The access mode control can be set to on/off:


            • On

            • Off


          • The select parking height function can be selected:


            • Normal

            • High
          Kick Door Control Sensor*7

          The hands free power trunk lid can be set to on/off:


          • On

          • Off
          Tire Pressure Warning System (TPWS)

          • The tire pressure warning system can be initialized.

          • The wheel set settings can be registered.
          Oil Maintenance*8 The oil maintenance management function can be reset.

          *1: Models with Lexus Safety System +

          *2: Models with Blind Spot Monitor (BSM) system

          *3: Models with Road Sign Assist (RSA) system

          *4: Models with headup display system

          *5: Models with navigation system

          *6: Models with air suspension system

          *7: Models with hands free power trunk lid

          *8: Except destination package for Hong Kong or Macau

          Meter Settings
          Item Available Setting
          Language

          The language used on the multi-information display can be selected:


          • English

          • French

          • Spanish

          • German*1

          • Italian*1

          • Russian*1

          • Chinese*2

          • Arabic*3
          Unit

          The unit displayed on the multi-information display can be selected:


          • miles (MPG (US)) (Default*4)

          • km (L/100 km) (Default*5)

          • km (km/L)
          Speedometer Display*6

          The speedometer display can be selected:


          • Digital (Default)

          • Analog

          • Digital/Analog Simultaneous
          Drive Information 1

          2 items can be selected among the following:


          • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) (Default of Upper Area)

          • Total Average Fuel Consumption Between Reset Operations (Default of Lower Area)

          • Average Fuel Consumption After Engine Start-up

          • Average Fuel Consumption After Refueling

          • Total Average Vehicle Speed Between Reset Operations

          • Average Vehicle Speed After Engine Start-up

          • Cruising Range After Engine Start-up

          • Total Elapsed Time Between Reset Operations

          • Elapsed Time After Engine Start-up

          • Cruising Range

          • Blank
          Drive Information 2

          2 items can be selected among the following:


          • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

          • Total Average Fuel Consumption Between Reset Operations

          • Average Fuel Consumption After Engine Start-up

          • Average Fuel Consumption After Refueling

          • Total Average Vehicle Speed Between Reset Operations (Default of Lower Area)

          • Average Vehicle Speed After Engine Start-up

          • Cruising Range After Engine Start-up

          • Total Elapsed Time Between Reset Operations

          • Elapsed Time After Engine Start-up

          • Cruising Range (Default of Upper Area)

          • Blank
          Clock

          The display mode of the clock can be selected:


          • 24 Hour Display (Default*1)

          • 12 Hour Display (Default*2)
          Interruption Display

          The following displays that appear as soon as the set conditions are met can be set to on (Default) or off:


          • Intersection Guidance (Auto (Default) or Off)*7

          • Incoming Telephone Display

          • Audio Feedback

          • Volume Feedback

          • Stop and Start System Duration

          • Stop and Start System Status

          • Adjust Brightness
          Theme Setting

          The theme setting can be changed:


          • White Heat (Default)

          • Titanium Silver
          REV Indicator*8

          • The rev indicator setting can be set to on/off:


            • On (Default)

            • Off


          • The engine speed for rev indicator activation can be set at increments of 100 r/min between 2000 r/min and 6800 r/min. (Default at 5000 r/min)
          REV Peak*8

          The tachometer peak hold function can be set to on/off:


          • On (Default)

          • Off
          ECO Driving Indicator

          The ECO driving indicator can be set to on/off:


          • On (Default)

          • Off
          Default Settings The set items can be initialized.

          *1: Models for Europe

          *2: Except models for Europe

          *3: Models for G.C.C. countries or some destination package

          *4: Destination package for United Kingdom

          *5: Except destination package for United Kingdom

          *6: Models with Normal meter

          *7: Models with navigation system

          *8: Models with F-SPORT meter

      5. Interruption Display


        • When a warning is necessary, the warning message interrupts the current display on the multi-information display.

        • A warning message is displayed via an interrupt display when a vehicle malfunction occurs to warn the driver. Also, an advice message is displayed via an interrupt display depending on the situation, such as when the driver must proceed with caution.

        • The master warning indicator may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        • The intersection guidance*1, telephone display, audio feedback, volume feedback and voice recognition*2 content displays are linked with the multi-media system and displayed via an interrupt display.

        • When the rheostat switch is operated, the adjust brightness interrupt display is displayed.


          • *1: Models with navigation system

          • *2: Models with voice recognition search system


          Engine System

        1. The combination meter assembly displays the following messages based on signals received from the ECM, engine oil pressure switch assembly and engine oil level sensor.

          Message Master Warning Indicator Buzzer

          Accelerator Stuck

          Depress Brake to Stop

          (and image display)

          		 Blinks Sounds

          Release Accelerator

          (and image display)

          		 Blinks Sounds
          Speed Limit Exceeded*1 - -

          Check Engine

          Visit Your Dealer

          		 Illuminates Sounds

          Check Engine

          Reduced Engine Power

          Visit Your Dealer

          		 Illuminates Sounds

          Reduced Engine Power

          Visit Your Dealer

          		 Illuminates Sounds

          Engine Maintenance Required

          Visit Your Dealer

          		 Illuminates Sounds

          Engine Coolant Temp High

          Stop in a Safe Place

          See Owner's Manual

          (and image display)

          		 Illuminates Sounds

          Charging System Malfunction

          Stop in a Safe Place

          See Owner's Manual

          (and image display)

          		 Illuminates Sounds

          Oil Pressure Low

          Stop in a Safe Place

          See Owner's Manual

          (and image display)

          		 Illuminates Sounds

          Drive-Start Control Malfunction

          Visit Your Dealer

          (and image display)

          		 Illuminates Sounds

          Brake Override Malfunction

          Visit Your Dealer

          (and image display)

          		 Illuminates Sounds

          Engine Oil Level Low

          Add or Replace

          		 - -

          Accelerator and Brake Pedals Depressed Simultaneously

          (and image display)

          		 Blinks -
          Fuel Low - -
          Oil Maintenance Required Soon*2 - -
          Oil Maintenance Required*2 - -

          *1: Models for G.C.C. countries

          *2: Except destination package for Hong Kong or Macau


          Cruise Control System (Models without Lexus Safety System +)

        1. The combination meter assembly displays the following messages based on signals received from the ECM.

          Message Master Warning Indicator Buzzer

          Cruise Control Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Dynamic Radar Cruise Control System (Models with Lexus Safety System +)

        1. The combination meter assembly displays the following messages based on signals received from the ECM.

          Message Master Warning Indicator Buzzer

          Dynamic radar cruise control proximity warning

          (image display)

          		 - Sounds

          Radar Cruise Control Unavailable

          Clean Sensor

          		 Illuminates Sounds
          Radar Cruise Control Unavailable Illuminates Sounds

          Radar Cruise Control Unavailable

          Depress Brake to Resume Driving*

          		 - -

          Cruise Control Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Cruise Control Fault

          Press Brake to Deactivate

          Visit Your Dealer*

          		 Illuminates Sounds

          Radar Cruise Active

          Please Pay Attention to Other Vehicles

          		 - -

          Dynamic radar cruise control system status

          (image display)

          		 - -

          *: Models with full-speed range following function


          Lane Keeping Assist (LKA) System (Models with LKA System)

        1. The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

          Message Master Warning Indicator Buzzer

          Lane departure alert

          (image display)

          		 -

          Not Sounds*1

          /Sounds*2

          LKA

          Hold Steering Wheel

          (and image display)

          		 - -

          LKA

          Steering Assist Unavailable

          Hold Steering Wheel

          (and image display)

          		 Illuminates -

          Lane Keeping Assist Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          Front Camera Unavailable - -
          Lane Keeping Assist Unavailable Illuminates Sounds

          Lane Keeping Assist Turned On

          Steering Assist Active

          		 - -

          Lane Keeping Assist Turned On

          Steering Assist Inactive

          		 - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -
          Lane Keeping Assist Unavailable at Current Speed - -

          Lane Keeping Assist (LKA) system status

          (image display)

          		 - -

          Would You Like to Take a Break?

          (and image display)

          		 - Sounds

          Please Take a Break

          (and image display)

          		 - Sounds

          *1: "Steering wheel vibration" is selected for the Warning Method setting.

          *2: "Buzzer" is selected for the Warning Method setting.


          Lane Departure Alert (LDA) System (Models with LDA System)

        1. The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

          Message Master Warning Indicator Buzzer

          Lane departure alert

          (image display)

          		 -

          Not Sounds*1

          /Sounds*2

          LDA

          Hold Steering Wheel

          (and image display)

          		 - -

          LDA

          Steering Assist Unavailable

          Hold Steering Wheel

          (and image display)

          		 Illuminates -

          Lane Departure Alert Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          Front Camera Unavailable - -
          Lane Departure Alert Unavailable Illuminates Sounds

          Lane Departure Alert Turned On

          Steering Assist Active

          		 - -

          Lane Departure Alert Turned On

          Steering Assist Inactive

          		 - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -

          Lane Departure Alert Unavailable

          Below Approx 50km/h

          		 - -

          Lane Departure Alert Unavailable

          Below Approx 32MPH
          Lane Departure Alert Unavailable at Current Speed - -

          Lane Departure Alert (LDA) system status

          (image display)

          		 - -

          Would You Like to Take a Break?

          (and image display)

          		 - Sounds

          Please Take a Break

          (and image display)

          		 - Sounds

          *1: "Steering wheel vibration" is selected for the Warning Method setting.

          *2: "Buzzer" is selected for the Warning Method setting.


          Road Sign Assist (RSA) System (Models with RSA System)

        1. The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

          Message Master Warning Indicator Buzzer
          Front Camera Unavailable - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -

          RSA Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Stop and Start System

        1. The combination meter assembly displays the following messages based on signals received from the engine stop and start ECU.

          Message Master Warning Indicator Buzzer

          Extended

          Prolongs Stop & Start and Reduces AC Output

          		 - -

          Standard

          Balances Stop & Start and AC Output

          		 - -

          Stop & Start System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Transmission System

        1. The combination meter assembly displays the following messages based on signals received from the ECM.

          Message Master Warning Indicator Buzzer
          Slippery Road Cannot Shift to Lower Gear Illuminates Sounds

          Transmission Fluid Temp High

          See Owner's Manual

          		 Illuminates Sounds

          Electronic Shift Lever System

        1. The combination meter assembly displays the following messages based on signals received from the ECM and shift control ECU.

          Message Master Warning Indicator Buzzer

          Shift System Malfunction

          Apply Parking Brake Securely When Parking

          See Owner's Manual

          		 Illuminates Sounds

          Battery Low

          Apply Parking Brake Securely When Parking

          See Owner's Manual

          		 Illuminates Sounds

          P Switch Malfunction

          Apply Parking Brake Securely When Parking

          See Owner's Manual

          		 Illuminates Sounds

          Shift System Unavailable

          Apply Parking Brake Securely When Parking

          See Owner's Manual

          		 Illuminates Sounds

          Shift System Malfunction

          See Owner's Manual

          		 Illuminates Sounds

          Shift System Malfunction

          Stop in a Safe Place

          See Owner's Manual

          		 Illuminates Sounds

          Battery Low

          Shifting Unavailable

          See Owner's Manual

          		 Illuminates Sounds
          Engine Must be Started to Shift - Sounds

          Shifting Unavailable

          Wait a Moment and Shift Again

          		 Illuminates Sounds
          Vehicle Must be in D to Shift Into M - Sounds
          Depress Brake to Shift - Sounds

          Shifted Into N

          Vehicle Must be in D to Shift Into M

          		 Illuminates Sounds

          Shifted Into N

          Vehicle Must be Stopped to Shift Into D

          		 Illuminates Sounds

          Shifted Into N

          Vehicle Must be Stopped to Shift Into R

          		 Illuminates Sounds

          Shifted Into N

          Vehicle Must be Stopped to Shift Into P

          		 Illuminates Sounds
          Release Accelerator to Shift - Sounds
          Temporarily Hold Shift Lever in N Position to Shift Into N Illuminates Sounds

          Shifted Into N

          Shift Again to Drive

          		 Illuminates Sounds

          Stop Vehicle in a Safe Place

          Push P Switch

          		 Illuminates Sounds

          Shift System Malfunction

          Shifting Unavailable

          Drive to a Safe Place and Stop

          		 Illuminates Sounds

          Shift System Malfunction

          Driving Unavailable

          		 Illuminates Sounds

          Air Suspension System (Models with Air Suspension System)

        1. The combination meter assembly displays the following messages based on signals received from the suspension control ECU.

          Message Master Warning Indicator Buzzer
          Check Air Suspension System Illuminates Sounds

          Tire Pressure Warning System

        1. The combination meter assembly displays the following messages based on signals received from the tire pressure warning ECU and receiver.

          Message Master Warning Indicator Buzzer

          TPWS malfunction

          Visit Your Dealer

          (and image display)

          		 - -
          Setting TPWS - -

          Registering Each TPWS Sensor

          (and image display)

          		 - -

          Tire Pressure Low

          Check Tire

          (and image display)

          		 - -

          Brake System

        1. The combination meter assembly displays the following messages based on signals received from the skid control ECU and pad wear indicators.

          Message Master Warning Indicator Buzzer

          Braking Power Low

          Stop in a Safe Place

          See Owner's Manual

          		 Blinks Sounds

          Brake Hold Fault

          Depress Brake to Deactivate

          Visit Your Dealer

          		 Illuminates Sounds

          Brake Hold Warning

          Depress Brake On Slope

          		 Blinks Sounds

          Antilock Brake System Malfunction

          Visit Your Dealer

          		 - Sounds

          Brake Hold Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Brake Hold Active

          Depress Brake and Switch to Deactivate

          		 - Sounds

          Brake Hold Unavailable

          Driver Door Open

          		 - Sounds

          Brake Hold Unavailable

          Driver Seat Belt Unbuckled

          		 - Sounds

          Brake Hold Unavailable

          Hood or Trunk Open

          		 - Sounds
          Depress Brake to Maintain Brake Hold - Sounds
          Close Driver Door to Maintain Brake Hold - Sounds
          Fasten Driver Seat Belt to Maintain Brake Hold - Sounds

          Brake Pad Wear.

          Visit Your Dealer

          		 Illuminates Sounds
          Traction Control Turned Off - -

          Secondary Collision Brake System Malfunction

          Visit Your Dealer*

          		 Illuminates Sounds

          *: Models with Lexus Safety System +


          Electric Parking Brake (EPB) System

        1. The combination meter assembly displays the following messages based on signals received from the parking brake ECU assembly.

          Message Master Warning Indicator Buzzer

          EPB Cannot be Released

          Close Door and Fasten Your Seatbelt

          		 Blinks -
          EPB Applied Blinks -
          Vehicle May Roll Out Shift to P Blinks Sounds
          EPB Activation Stopped Incompletely Blinks Sounds

          EPB Release Unavailable

          Depress Brake Pedal for EPB Release

          		 - -

          EPB Frequently Operated

          Wait a Minute

          		 Blinks -
          EPB unavailable Illuminates Sounds

          EPB Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          EPB Automatically Applied - -
          EPB Shift Interlock Function Activated - Sounds
          EPB Shift Interlock Function Deactivated - Sounds

          Vehicle May Roll Out

          Park the Vehicle On Flat Road

          		 Blinks Sounds

          Electric Power Steering (EPS) System

        1. The combination meter assembly displays the following messages based on signals received from the power steering ECU.

          Message Master Warning Indicator Buzzer

          Power Steering Malfunction Steering Power Low

          Visit Your Dealer

          		 Illuminates → Blinks Sounds

          Steering Power Low

          Visit Your Dealer

          		 Illuminates → Blinks Sounds

          Power Steering Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Engine Stopped

          Steering Power Low

          		 Illuminates Sounds

          Variable Gear Ratio Steering (VGRS) System (Models with VGRS System)

        1. The combination meter assembly displays the following messages based on signals received from the front steering control ECU.

          Message Master Warning Indicator Buzzer

          VGRS Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Dynamic Rear Steering (DRS) System (Models with DRS System)

        1. The combination meter assembly displays the following messages based on signals received from the rear steering control ECU.

          Message Master Warning Indicator Buzzer

          DRS Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Sub-battery System

        1. The combination meter assembly displays the following messages based on signals received from the sub-battery ECU.

          Message Master Warning Indicator Buzzer

          Sub-Battery System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          ParKing Support Alert (PKSA) System

        1. The combination meter assembly displays the following messages based on signals received from the clearance warning ECU assembly, blind spot monitor sensor RH and television camera assembly.

          Message Master Warning Indicator Buzzer

          Lexus Parking Assist-sensor detection display

          (image display)

          		 - -

          Parking Assist Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Parking Assist Unavailable

          Clean Parking Assist Sensor

          		 Illuminates Sounds
          Parking Assist Unavailable Illuminates Sounds
          CHECK RCTA SYSTEM*1 Illuminates Sounds
          RCTA NOT AVAILABLE*1 Illuminates Sounds
          ParKing Support Alert (PKSA) system temporary mute display - -
          Rear Camera Detection Unavailable*2 Blinks -

          Rear Camera Detection Unavailable

          Remove the Dirt of Rear Camera*2

          		 Blinks -

          Rear Camera Detection Malfunction

          Visit Your Dealer*2

          		 Blinks Sounds

          *1: Models with Blind Spot Monitor (BSM) system

          *2: Models with panoramic view monitor system


          ParKing Support Brake (PKSB) System (Models with PKSB System)

        1. The combination meter assembly displays the following messages based on signals received from the clearance warning ECU assembly.

          Message Master Warning Indicator Buzzer

          Switch to Brake

          (image display)

          		 Blinks Sounds

          Press Brake Pedal

          (image display)

          		 Blinks Sounds
          BRAKE! Blinks Sounds

          Object Detected

          Acceleration Reduced

          		 - -

          Parking Support Brake Malfunction

          Visit Your Dealer

          		 Blinks Sounds
          Parking Support Brake Unavailable Blinks -

          Blind Spot Monitor (BSM) System (Models with BSM System)

        1. The combination meter assembly displays the following messages based on signals received from the blind spot monitor sensor RH.

          Message Master Warning Indicator Buzzer
          BSM Not Available Illuminates Sounds

          BSM Malfunction

          Visit Your Dealer

          		 - Sounds

          Automatic Rear Flashing Hazard Lights (ARFHL) System (Models with ARFHL System)

        1. The combination meter assembly displays the following messages based on signals received from the blind spot monitor sensor RH.

          Message Master Warning Indicator Buzzer
          Rear Traffic Approaching - -

          FHL Malfunction

          Visit Your Dealer

          		 - Sounds
          FHL Not Available - -

          Entry and Start System

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU and certification ECU.

          Message Master Warning Indicator Buzzer
          Push and Hold Engine Switch for Emergency Stop Blinks Sounds
          Shift to N Position and Push Engine Switch to Restart Blinks Sounds

          Engine Stopped

          Shift to P Position

          		 Blinks Sounds

          Engine Stopped

          Stop in a Safe Place

          		 Blinks Sounds
          Shift to P Before Exiting Vehicle Blinks Sounds
          Auto Power Off to Conserve Battery - -
          Key Not Detected Check Key Location - Sounds

          Entry & Start System Malfunction

          See Owner's Manual

          		 Illuminates Sounds
          Turn Off Vehicle - Sounds
          Key Detected in Vehicle - -
          Depress Brake Pedal and Touch Engine Switch with Key - Sounds

          Not Ready to Drive

          Depress Brake Pedal and Touch Engine Switch with Key

          		 - -
          Depress Brake Pedal and Push Engine Switch to Start -

          Sounds*1/

          Not Sounds*2
          - -
          - Sounds
          Shift to P Position Blinks Sounds
          Push Engine Switch While Turning Steering Wheel in Either Direction Blinks Sounds

          Key Battery Low

          Replace Key Battery

          		 - Sounds

          A New Key has been Registered

          Contact Your Dealer for Details

          		 - -

          Depress Brake Pedal and Push Engine Switch to Start

          (and image display)

          		 - Sounds

          Entry unlock mode switching display

          (image display)

          		 - -

          *1: Engine switch off

          *2: Engine switch on (IG)


          Theft Deterrent System

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU.

          Message Master Warning Indicator Buzzer
          Theft Sensor Turned OFF - -
          Theft Sensor Turned ON - -

          Supplemental Restraint System (SRS) Airbag System

        1. The combination meter assembly displays the following messages based on signals received from the airbag ECU assembly.

          Message Master Warning Indicator Buzzer

          SRS Airbag System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Pop Up Hood System

        1. The combination meter assembly displays the following messages based on signals received from the pedestrian detection ECU assembly.

          Message Master Warning Indicator Buzzer

          Pedestrian Protection System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Pedestrian Protection System Actuated

          Visit Your Dealer

          		 Illuminates Sounds

          Pre-Collision System (PCS) (Models with PCS)

        1. The combination meter assembly displays the following messages based on signals received from the driving support ECU assembly.

          Message Master Warning Indicator Buzzer
          BRAKE! - Sounds
          Front Camera Unavailable - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -

          Pre-Collision System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          VSC Turned Off

          Pre-Collision Brake System Unavailable

          		 - -
          Pre-Collision System Unavailable - -

          Pre-Collision System Unavailable

          Clean Sensor

          		 - -
          Pre-Collision System Off - -

          Air Conditioning System

        1. The combination meter assembly displays the following messages based on signals received from the air conditioning amplifier assembly.

          Message Master Warning Indicator Buzzer

          High Power Consumption

          Partial Limit On AC/Heater Operation

          		 Blinks -

          Power Window System

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU.

          Message Master Warning Indicator Buzzer
          Window Open Blinks Sounds
          Window/Moon Roof Open Blinks Sounds

          Sliding Roof System

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU.

          Message Master Warning Indicator Buzzer
          Moon Roof Open Blinks Sounds
          Window/Moon Roof Open Blinks Sounds

          Door

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU.

          Message Master Warning Indicator Buzzer

          Driver door open

          (image display)

          		 - -

          Front passenger door open

          (image display)

          Rear passenger door LH open

          (image display)

          Rear passenger door RH open

          (image display)

          Hood open

          (image display)

          Luggage compartment door open

          (image display)

          Driver door open while driving*

          (image display)

          		 Blinks Sounds

          Front passenger door open while driving*

          (image display)

          Rear passenger door LH open while driving*

          (image display)

          Rear passenger door RH open while driving*

          (image display)

          Hood open while driving*

          (image display)

          Luggage compartment door open while driving*

          (image display)

          *: If the vehicle has reached a speed of 5 km/h (3 mph).


          Mirror System

        1. The combination meter assembly displays the following messages based on signals received from the No. 2 position control ECU assembly.

          Message Master Warning Indicator Buzzer

          If You Cannot See Door Mirror,

          Please Move Passenger Seat

          		 Blinks Sounds

          Wiper System

        1. The combination meter assembly displays the following messages based on signals received from the windshield wiper ECU.

          Message Master Warning Indicator Buzzer

          Wiper System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Washer System

        1. The combination meter assembly displays the following messages based on signals received from the level warning switch assembly.

          Message Master Warning Indicator Buzzer
          Windshield Washer Fluid Low - -

          Lighting System

        1. The combination meter assembly displays the following messages based on signals received from the headlight light ECU sub-assembly RH and headlight light ECU sub-assembly LH.

          Message Master Warning Indicator Buzzer

          Headlight System Uninitialized

          Visit Your Dealer

          		 - -
          Front Camera Unavailable -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -
          Turn Lights Off*1 Blinks Sounds

          Headlight System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          To Activate AHB, Switch Headlights to High Beam*2 - -
          To Activate AHS, Switch Headlights to High Beam*3 - -

          *1: Models with light reminder function

          *2: Models with Automatic High Beam (AHB) system

          *3: Models with Adaptive High beam System (AHS)


          Reminder Service/Operation Advisory Function

        1. The reminder service/operation advisory function displays the following setting change reminders and operation support displays via an interrupt display when conditions are met according to the vehicle condition and various switch operations.

          Reminder Details Display Condition Multi-information Display Choice
          Headlight illumination reminder When system determines vehicle is being driven at night with headlights turned off Turn On Headlamps -
          Turn headlights off after stopping reminder (when light control switch is not set to AUTO) When headlights are illuminated after engine switch is turned off (light control switch is in TAIL or HEAD position) Headlamps Are On -
          Turn headlights off after stopping reminder (when light control switch is set to AUTO) When headlights are illuminated after engine switch is turned off (light control switch is in AUTO position)

          Headlamps Are On

          Turn Headlamps Off?

          • Yes

          • No
          Close door windows during wiper operation reminder If any door window is open when attempting to operate wipers Close Windows?

          • Yes

          • No

    2. Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Reverse Warning Buzzer (Once)
        2 Pre-Collision System (PCS) Warning Buzzer (Intermittent)*1
        3 Engine Switch Operation while Driving Warning Buzzer (Intermittent)
        4 Seat Belt Warning Level 2 Buzzer (Intermittent)
        5 Seat Belt Warning Level 1 Buzzer (Intermittent)
        6 Dynamic Radar Cruise Control System Proximity Warning Buzzer (Intermittent)*1
        7 Emergency Stop Warning Buzzer (Continuous)
        8 Unexpected Vehicle Motion Warning Buzzer (Intermittent)
        9 Unexpected Vehicle Motion Warning Buzzer (Continuous)
        10 Brake Force Reduction Warning Buzzer (Intermittent)
        11 Brake Fluid Low Warning Buzzer (Intermittent)
        12 Engine Oil Pressure Warning Buzzer (Intermittent)
        13 EPS Warning Buzzer (Once)
        14 EPS Warning Buzzer (Intermittent)
        15 Lane Departure Alert Buzzer (Intermittent)*1
        16 Road Sign Assist System Warning Buzzer (Once)*2
        17 Engine Coolant Temperature Warning Buzzer (Once)
        18 Door Open when Shift Position not in P Warning Buzzer (Continuous)
        19 Lane Keeping Assist (LKA) System*3/Lane Departure Alert (LDA) System*4 Cancel Warning Buzzer (Twice)
        20 Shift-by-wire Buzzer 1 (Once)
        21 Shift-by-wire Buzzer (Twice)
        22 Shift-by-wire Buzzer 2 (Once)
        23 Stop and Start System Warning Buzzer (Continuous)
        24 Entry and Start System Warning Buzzer 1 (Intermittent)
        25 P Position Operation Advice Buzzer (Continuous)
        26 Brake System Temperature Rise Warning/Active Test Buzzer (Intermittent)
        27 Dynamic Radar Cruise Control System Brake Pedal Operation Request Buzzer (Intermittent)*5
        28 Entry and Start System Warning Buzzer 2 (Intermittent)
        29 Entry and Start System Warning Buzzer (Once)
        30 Multi-information Display Warning Buzzer (Once)
        31 Shift-by-wire Buzzer (Intermittent)
        32 Electric Parking Brake System Cancel Warning Buzzer (Once)
        33 Brake Hold System Control Not Release Warning Buzzer (Twice)
        34 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning Buzzer (Twice)*1
        35 Low Speed Zone Leading Vehicle Lost Warning Buzzer (Fourth)*5
        36 Immobiliser Certification Reminder Buzzer (Once)
        37 Speed Limit Warning Buzzer (Intermittent)*6
        38 Parking Brake Engaged Warning Buzzer (Intermittent)
        39 Door Open while Driving Warning Buzzer (Intermittent)
        40 Vehicle Sway Warning Buzzer (Twice)*1
        41 Shift Reject Buzzer (Twice)
        42 Light Reminder Buzzer (Continuous)*7
        43 EPB Shift Interlock Function Deactivated Buzzer (Once)
        44 EPB Shift Interlock Function Activated Buzzer (Once)
        45 Turn Signal/Hazard Warning Operation Buzzer (Intermittent)

        *1: Models with Lexus Safety System +

        *2: Models with road sign assist system

        *3: Models with LKA system

        *4: Models with LDA system

        *5: Models with full-speed range following function

        *6: Models for G.C.C. countries

        *7: Models with light reminder function