ENTRY AND START SYSTEM


  1. CONSTRUCTION


    1. "IGNITION ON" or "ACCESSORY" is displayed on the combination meter assembly according to the current power source change condition. In addition, when the engine can be started, "Key Certification Indicator" is displayed on the multi-information display. As a result, the user can check the current power source change condition and engine startability condition.

    2. When a malfunction occurs in the entry and start system, a message is displayed on the multi-information display in the combination meter assembly to inform the driver of a entry and start system malfunction. In addition, the master warning light illuminates or flashes according to the message and the multi buzzer sounds.

      Figure 1. Normal Meter

      B003I02C01
      *1 Master Warning Light *2 Multi-information Display
      *a Power Source Mode Condition Displayed - -

      Figure 2. F-SPORT Meter

      B003I5XC01
      *1 Multi-information Display *2 Master Warning Light
      *a Ring Center Display Mode *b Ring Side Display Mode
      *c Power Source Mode Condition Displayed - -
      Power Source Display
      Displayed Item Power Source Condition
      Off

      Either of the following conditions is met:


      • The engine has started.

      • The power source is turned off.*1
      ACCESSORY On (ACC) state
      IGNITION ON On (IG) state (the engine is not started.)
      Key Certification Indicator Engine start ready state*2

      Tech Tips

      *1: Excludes the engine start possible condition.

      *2: The shift position is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).