BRAKE SYSTEM(w/ Vacuum Brake Booster)


  1. CONSTRUCTION


    1. A single diaphragm type brake booster is used to achieve weight reduction.

    2. Tie-rods are used inside the brake booster to ensure rigidity during operation.

    3. A vacuum warning switch assembly*1 and vacuum sensor assembly*2, which detects the brake booster vacuum pressure, are installed to the brake booster.


      • *1: Models with V35A-FTS engine without stop and start system and 8GR-FKS engine

      • *2: Models with V35A-FTS engine with stop and start system and 8GR-FKS engine

      Figure 1. Brake Booster Assembly

      B0056GXC02
      *A Models with V35A-FTS Engine without Stop and Start System and 8GR-FKS Engine *B Models with V35A-FTS Engine with Stop and Start System and 8GR-FKS Engine
      *1 Vacuum Warning Switch Assembly *2 Vacuum Sensor Assembly