FRONT SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. A lightweight and hollow stabilizer bar is used.

    2. A ball joint type stabilizer link is used. Also, the stabilizer link is press-fit into the lower No.2 suspension arm assembly to achieve efficiency of the stabilizer.

    3. The stabilizer bushes are connected to the stabilizer bar and bracket to ensure high roll rigidity.

      Figure 1. 2WD Models

      B0056VUC01
      *1 Front Stabilizer Bar *2 Front Stabilizer Link Assembly

      Figure 2. AWD Models

      B0056P7C01
      *1 Front Stabilizer Bar *2 Front Stabilizer Link Assembly