DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. Front Drive Shaft (AWD Models)


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the front differential side, and a Rzeppa type CVJ is used on the axle side.

        B0056EIC01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Front Drive Shaft Assembly LH *4 Front Drive Shaft Assembly RH
        B0056J1 Axle Side B005637 Front Differential Side

    2. Rear Drive Shaft


      1. A cross groove type Constant-Velocity Joint (CVJ) is used.

        B00566SC02
        *1 Cross Groove Type CVJ - -
        B0056J1 Axle side B005637 Rear Differential Side