AUTOMATIC TRANSMISSION SYSTEM


  1. CONSTRUCTION


    • A transmission revolution (NT) sensor is used. The sensor detects the speed of the rotor on the front planetary gear assembly and outputs the speed to the ECM.

    • A transmission revolution sensor (SP2) is used. The sensor detects the speed of the rotor on the output shaft assembly and outputs the speed to the ECM.

    • A Hall type revolution sensor is used for each sensor. The Hall type revolution sensor is composed of a magnet and a Hall IC. The Hall IC converts magnetic flux density changes that occur when the rotor rotates into electrical signals and outputs the signals to the ECM.

      B0056U8C01
      *1 Front Planetary Gear Assembly *2 Transmission Revolution (NT) Sensor
      *3 Transmission Revolution Sensor (SP2) *4 Output Shaft Assembly