LUBRICATION SYSTEM


  1. CONSTRUCTION


    1. 2WD Models


      1. A cartridge-type oil filter sub-assembly that has been made compact, lighter and has reduced pressure loss by using a high-efficiency filter is used.

      2. The oil filter sub-assembly is installed horizontally to make servicing without contacting high temperature oil during replacement possible, improving serviceability.

        B005669C02
        *1 Oil Filter Sub-assembly *2 Oil Filter Bracket Sub-assembly

    2. AWD Models


      1. An oil filter with a replaceable element is used. The element uses high-performance filter paper to improve filtration performance. It is also combustible for environmental protection.

      2. A plastic filter cap is used for weight reduction.

      3. This oil filter has a structure which can drain the engine oil remaining in the oil filter. This prevents engine oil from spattering when replacing the element and allows the technician to work without touching hot engine oil.

        B005683C01
        *1 Oil Filter Bracket Sub-assembly *2 Oil Filter Element
        *3 Oil Filter Cap Assembly *4 Oil Filter Drain Plug
        *5 Drain Pipe - -