FUEL SYSTEM


  1. CONSTRUCTION


    1. A pressed fuel delivery pipe (for port injection), whose walls create a damping effect on fuel pressure vibrations (pulses) that occur when the port fuel injector assembly injects fuel, is used. As a result, the fuel pressure pulsation damper was able to be discontinued, reducing the number of parts while achieving weight and size reduction.

    2. A fuel pressure sensor (for low pressure) is installed to the No. 1 Fuel Delivery Pipe Sub-assembly LH (for Port Injection).

    3. A O-ring seal is used for the fuel pressure sensor (low pressure) fastener.

      B0056WCC01
      *1 No. 1 Fuel Delivery Pipe Sub-assembly RH (for Port Injection) *2 Fuel Pressure Sensor (for Low Pressure)
      *3 No. 1 Fuel Delivery Pipe Sub-assembly LH (for Port Injection) *4 Port Fuel Injector Assembly