SEAT ASSEMBLY


  1. OUTLINE


    1. Seat Variation


      1. Either 10-way or 8-way power seats are used for the driver and front passenger seats.

      2. Normal type seats or sport type seats are provided depending on the model.

      3. The front seats offer excellent holding performance and seat comfort.

      4. An integrated fixed type seat is used for the rear seat.

      5. Both the front and rear seats feature quilted seats and seatbacks, emphasizing the three-dimensional appearance of the seat material.

        A004DW3C04
        *a The illustrations shown are examples only. - -

        Figure 1. Normal Type Seat

        A004E0OC02

        Figure 2. Sport Type Seat

        A004DFAC02

    2. Seat Cover


      1. Synthetic leather or genuine leather is provided for the seat cover.

    3. Front Seat Headrest


      1. A power vertical adjustment type front seat headrest assembly is used to allow fine adjustment of the headrest height. (for models with normal type seats)

      2. The adjustable range of the front seat headrest assembly is approximately 35 mm (1.37 in.).

        A004DIVC02
        *a Headrest Adjustable Range - -

  2. MAIN FEATURES


    1. Front Seat


      1. Holding performance at the lower back and a perfect fit at the seat surface have been ensured, allowing the occupants to feel at one with the vehicle.

      2. The seats employ an "integrated foaming" construction method, which allows for a design that was unavailable for conventional models. This has achieved a higher level of fit and holding performance when driving on the circuit. (for models with sport type seats)

      3. A layer structure separating the main and side parts of the front seat is used to achieve both sporty performance and innovative design. (for models with normal type seats)