METER / GAUGE SYSTEM


  1. CONSTRUCTION


    1. Multi-information Display


      1. Display Function Flow


        • The multi-information display flow can be switched as shown in the flow chart below:

          A004DJ6E04
          *A Destination Package for United Kingdom
          *B Models with Active Rear Wing System
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d Engine switch is turned on (IG).
          *e Item or display is selected by operating the steering pad switch assembly.
          *f Back/ring movable switch is briefly pressed.
          *g Movable meter ring is operated.
          A004DO1E04
          *A Models with Lexus Safety System+
          *B Models with Active Rear Wing System
          *C Models with Navigation System
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d Odometer is displayed for a certain period of time after the engine switch is turned off.
          *e Item or display is selected by operating the steering pad switch assembly.
          *f Back/ring movable switch is briefly pressed.
          *g Movable meter ring is operated.

      2. Display Tab Operation


        • When the ring side display mode is selected, the left and right switches of the steering pad switch assembly can be operated to select display tabs and switch the displayed information.

          A004DSFC01
          *A Models with Navigation System - -
          *1 Drive Information *2 Navigation Information
          *3 Audio Information *4 Driving Support System Information
          *5 Warning Message *6 Settings
          *a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
          A004DYG Left Switch Operation A004DTZ Right Switch Operation

      3. Drive Information


        • Drive information shows vehicle information such as drivable range and fuel consumption.

        • The drive information can be switched using the up/down switch on the steering pad switch assembly.

          Figure 1. Ring Center Display Mode

          A004E2IC01
          *A Destination Package for United Kingdom *B Models with Active Rear Wing System
          *1 Drive Information 1 *2 Drive Information 2
          *3 Tire Inflation Pressure Display *4 Gear Position Indicator
          *5 Unit Change *6 G Monitor
          *7 Rear Wing Position *8 Blank
          *a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
          A004DYG Up Switch Operation A004DTZ Down Switch Operation

          Figure 2. Ring Side Display Mode

          A004D9SC01
          *A Models with Lexus Safety System+ *B Models with Active Rear Wing System
          *1 Drive Information 1 *2 Drive Information 2
          *3 ECO Driving Indicator Zone Display *4 Engine Oil Temperature Gauge
          *5 G Monitor *6 Gear Position Indicator
          *7 Vehicle Sway Warning *8 Tire Inflation Pressure Display
          *9 Rear Wing Position *10 Blank
          *a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
          A004DYG Up Switch Operation A004DTZ Down Switch Operation

      4. Setting Function


        • The items displayed on the multi-information display or headup display* can be customized.


          • *: Models with headup display


        • The following items can be selected on the information setting screen:

          LDA (Lane Departure Alert) System*
          Item Available Setting
          Steering Assist

          Setting for steering assist can be set to on/off:


          • On

          • Off
          Sensitivity

          Alert sensitivity of alert system can be changed:


          • High

          • Standard
          Sway Warning

          Vehicle sway warning can be set to on/off:


          • On

          • Off
          Sway Sensitivity

          Vehicle sway warning sensitivity can be selected:


          • High

          • Standard

          • Low

          *: Models with LDA system

          LKA (Lane Keeping Assist System)*
          Item Available Setting
          Lane Center

          Setting for lane centering function can be set to on/off:


          • On

          • Off
          Steering Assist

          Setting for steering assist can be set to on/off:


          • On

          • Off
          Sensitivity

          Alert sensitivity of alert system can be changed:


          • High

          • Standard
          Sway Warning

          Vehicle sway warning can be set to on/off:


          • On

          • Off
          Sway Sensitivity

          Vehicle sway warning sensitivity can be selected:


          • High

          • Standard

          • Low

          *: Models with LKA system

          PCS (Pre-Collision System)*
          Item Available Setting
          PCS

          The pre-collision system can be set to on/off:


          • On

          • Off
          Sensitivity

          The pre-collision system sensitivity can be selected:


          • Far (Icon is displayed)

          • Middle (Icon is displayed)

          • Near (Icon is displayed)

          *: Models with Lexus Safety System+

          BSM (Blind Spot Monitor System)*
          Item Available Setting
          BSM

          The blind spot monitor system can be set to on/off:


          • On

          • Off
          RCTA

          The RCTA function can be set to on/off:


          • On

          • Off

          *: Models with blind spot monitor system

          Parking Assist (Lexus Parking Assist-sensor System)
          Item Available Setting
          Lexus Parking Assist-sensor System

          The Lexus parking assist-sensor system can be set to on/off:


          • On

          • Off
          Speed Warning*
          Item Available Setting
          Speed Warning

          The speed warning can be set to on/off:


          • On

          • Off
          Speed Setting The vehicle speed for speed warning activation can be set between 30 km/h (20 MPH) and 260 km/h (160 MPH). (Default at 30 km/h (20 MPH))

          *: Models for Europe

          RSA (Road Sign Assist)*
          Item Available Setting
          RSA

          The road sign assist system can be set to on/off:


          • On

          • Off

          *: Models with road sign assist system

          HUD (Head-Up Display) Brightness/Position*
          Item Available Setting
          HUD Brightness/Position

          • The brightness and position of the headup display image can be changed.

          • When changing the brightness of the headup display image, press the left/right switch on the steering pad switch assembly.

          • When changing the position of the headup display image, press the up/down switch on the steering pad switch assembly.

          *: Models with headup display

          Units*
          Item Available Setting
          Unit

          The unit displayed can be selected:


          • MPH

          • km/h

          *: Destination package for United Kingdom

          Clock
          Item Available Setting
          Clock

          The display mode of the clock can be selected:


          • 12 Hour Display

          • 24 Hour Display
          Vehicle Settings
          Item Available Setting
          RSA*1

          • The excess speed notification method can be selected:


            • No Notification

            • Only Visual

            • Visual and Audible

          • The excess speed notification level can be be selected:


            • 10 km/h (5 mph)

            • 5 km/h (3 mph)

            • 2 km/h (1 mph)

          • The other notifications method can be selected:


            • No Notification

            • Only Visual

            • Visual and Audible
          BSM*2

          • The brightness of the BSM indicator light can be switched:


            • Bright

            • Dim

          • The BSM warning sensitivity level can be switched:


            • Early (Icon is displayed)

            • Middle (Icon is displayed)

            • Later (Icon is displayed)

            • Only blind spots (Icon is displayed)

          • The volume of the RCTA buzzer can be switched:


            • 1 (Quiet)

            • 2 (Medium)

            • 3 (Loud)
          Rear Wing*3

          The active rear wing system can be set to on/off:


          • On

          • Off
          HUD Driving Support*4

          The tachometer display area can be switched:


          • Tachometer

          • ECO Driving Indicator Zone Display

          • Blank

          The HUD display contents can be set to on/off:


          • Navigation*5

          • Driving Assist

          • Audio

          • Compass*5
          HUD Rotation*4

          The angle of the HUD display can be corrected in the rotational direction:


          • Counterclockwise

          • Clockwise
          TPWS

          • The tire pressure warning system can be initialized.

          • The wheel set settings can be registered.
          Scheduled Maintenance*6 The maintenance required reminder function can be reset.

          *1: Models with road sign assist system

          *2: Models with blind spot monitor system

          *3: Models with active rear wing system

          *4: Models with headup display

          *5: Models with navigation system

          *6: Destination package for Korea

          Meter Settings
          Item Available Setting
          Language

          The language used on the multi-information display can be selected:


          • English

          • French

          • Spanish

          • German*1

          • Italian*1

          • Russian*1

          • Chinese*2

          • Arabic*3
          Unit

          The unit displayed on the multi-information display can be selected:


          • miles (MPG) (Default*4)

          • km (L/100 km) (Default*5)

          • km (km/L) (Default*6)
          ECO Driving Indicator Light

          The ECO driving indicator light can be set to on/off:


          • On (Default)

          • Off
          Drive Information 1

          2 items can be selected among the following:


          • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) (Default of Upper Area)

          • Total Average Fuel Consumption Between Reset Operations (Default of Lower Area)

          • Average Fuel Consumption After Engine Start-up

          • Average Fuel Consumption After Refueling

          • Total Average Vehicle Speed Between Reset Operations

          • Average Vehicle Speed After Engine Start-up

          • Cruising Range After Engine Start-up

          • Total Elapsed Time Between Reset Operations

          • Elapsed Time After Engine Start-up

          • Cruising Range

          • Blank
          Drive Information 2

          2 items can be selected among the following:


          • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

          • Total Average Fuel Consumption Between Reset Operations

          • Average Fuel Consumption After Engine Start-up

          • Average Fuel Consumption After Refueling

          • Total Average Vehicle Speed Between Reset Operations (Default of Lower Area)

          • Average Vehicle Speed After Engine Start-up

          • Cruising Range After Engine Start-up

          • Total Elapsed Time Between Reset Operations

          • Elapsed Time After Engine Start-up

          • Cruising Range (Default of Upper Area)

          • Blank
          Interruption Display

          The following displays that appear as soon as the set conditions are met can be set to on (Default) or off:


          • Intersection Guidance (Auto (Default) or Off)*7

          • Incoming Telephone Display

          • Audio Feedback

          • Volume Feedback

          • Adjust Brightness
          Ring Position Memory

          Movable meter ring position memorization can be set to on/off:


          • On

          • Off (Default)
          Theme Setting

          The theme setting can be changed:


          • White Heat (Default)

          • Titanium Silver
          REV Indicator

          • The rev indicator setting can be set to on/off:


            • On

            • Off (Default)


          • The engine speed for rev indicator activation can be set at increments of 100 r/min between 2000 r/min and 7300 r/min. (Default at 5000 r/min)
          REV Peak

          The tachometer peak hold function can be set to on/off:


          • On

          • Off (Default)
          Default Settings The set items can be initialized.

          *1: Models for Europe

          *2: Except models for Europe

          *3: Models for G.C.C. countries

          *4: Destination package for United Kingdom

          *5: Except destination package for United Kingdom or Korea

          *6: Destination package for Korea

          *7: Models with navigation system

      5. Interruption Display


        • When a warning is necessary, the warning message interrupts the current display on the multi-information display.

        • A warning message is displayed via an interrupt display when a vehicle malfunction occurs to warn the driver. Also, an advice message is displayed via an interrupt display depending on the situation, such as when the driver must proceed with caution.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        • The intersection guidance*, telephone display, audio feedback and volume feedback content displays are linked with the multi-media system and displayed via an interrupt display.

        • When the rheostat switch is operated, the adjust brightness interrupt display is displayed.


          • *: Models with navigation system


          Engine System

        1. The combination meter assembly displays the following messages based on signals received from the ECM, engine oil pressure switch assembly and engine oil level sensor.

          Message Master Warning Light Buzzer
          Cdy-2E - -
          Cdy-2 - -

          Accelerator Stuck

          Depress Brake to Stop

          		 Blinks Sounds
          Release Accelerator Blinks Sounds

          Check Engine

          Visit Your Dealer

          		 Illuminates Sounds

          Check Engine Reduced Engine Power

          Visit Your Dealer

          		 Illuminates Sounds

          Engine Maintenance Required

          Visit Your Dealer

          		 Illuminates Sounds

          Engine Coolant Temp High Stop in a Safe Place

          See Owner's Manual

          		 Illuminates Sounds

          Charging System Malfunction

          See Owner's Manual

          		 - -

          Oil Pressure Low

          Stop in a Safe Place

          See Owner's Manual

          		 Illuminates Sounds

          Drive-Start Control Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Brake Override Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          Engine Oil Level Low Add or Replace - -
          Accelerator and Brake Pedals Depressed Simultaneously Blinks -
          Fuel Low - -

          Roads May Be Icy

          Drive with Care

          		 - Sounds
          Maintenance Required Soon* - -

          Maintenance Required

          Visit Your Dealer*

          		 - -

          *: Destination package for Korea


          Cruise Control System (Models without Lexus Safety System+)

        1. The combination meter assembly displays the following messages based on signals received from the ECM.

          Message Master Warning Light Buzzer

          Cruise Control Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Dynamic Radar Cruise Control System (Models with Lexus Safety System+)

        1. The combination meter assembly displays the following messages based on signals received from the ECM.

          Message Master Warning Light Buzzer

          CHECKING

          CRUISE CONTROL C/D

          		 - -

          CHECKING

          CRUISE CONTROL BRAKE

          		 - -

          Dynamic radar cruise control proximity warning

          (image display)

          		 -

          -*

          Radar Cruise Control Unavailable

          Clean Sensor

          		 Illuminates Sounds
          Radar Cruise Control Unavailable Illuminates Sounds

          Radar Cruise Control Unavailable

          Depress Brake to Resume Driving

          		 - -

          Cruise Control Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Cruise Control Fault

          Press Brake to Deactivate

          Visit Your Dealer

          		 Illuminates Sounds

          Radar Cruise Active

          Please Pay Attention to Other Vehicles

          		 - -

          Dynamic radar cruise control system status

          (image display)

          		 - -

          *: A pre-collision city buzzer operation is activated.


          Lane Departure Alert (LDA) System (Models with LDA System)

        1. The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

          Message Master Warning Light Buzzer

          ADJUSTING

          LDA CAMERA

          		 - -

          Lane departure alert

          (image display)

          		 - Sounds
          Lane Departure Alert Driver Attention Required Illuminates -

          LDA Hold Steering Wheel

          (and image display)

          		 - -

          LDA Steering Assist Unavailable

          Hold Steering Wheel

          (image display)

          		 Illuminates Sounds

          Lane Departure Alert Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          Front Camera Unavailable - -
          Lane Departure Alert Unavailable Illuminates Sounds

          Lane Departure Alert Turned On

          Steering Assist Active

          		 - -

          Lane Departure Alert Turned On

          Steering Assist Inactive

          		 - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -

          Lane Departure Alert Unavailable

          Below Approx 50km/h

          		 - -

          Lane Departure Alert Unavailable

          Below Approx 32MPH

          Lane departure alert system status

          (image display)

          		 - -

          Would You Like to Take a Rest?

          (and image display)

          		 - Sounds

          Please Take a Rest

          (and image display)

          		 - Sounds

          Lane Keeping Assist (LKA) System (Models with LKA System)

        1. The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

          Message Master Warning Light Buzzer

          ADJUSTING

          LKA CAMERA

          		 - -

          Lane departure alert

          (image display)

          		 - Sounds
          Lane Keeping Assist Driver Attention Required Illuminates -

          LKA Hold Steering Wheel

          (and image display)

          		 - -

          LKA Steering Assist Unavailable

          Hold Steering Wheel

          (image display)

          		 Illuminates Sounds

          Lane Keeping Assist Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          Front Camera Unavailable - -
          Lane Keeping Assist Unavailable Illuminates Sounds

          Lane Keeping Assist Turned On

          Steering Assist Active

          		 - -

          Lane Keeping Assist Turned On

          Steering Assist Inactive

          		 - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -

          Lane keeping assist system status

          (image display)

          		 - -

          Would You Like to Take a Rest?

          (and image display)

          		 - Sounds

          Please Take a Rest

          (and image display)

          		 - Sounds

          Road Sign Assist (RSA) System (Models with RSA System)

        1. The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

          Message Master Warning Light Buzzer
          Check RSA System Illuminates Sounds
          Front Camera Unavailable - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -

          Transmission System

        1. The combination meter assembly displays the following messages based on signals received from the ECM.

          Message Master Warning Light Buzzer
          CDY-2 - -
          T/M LEARNING - -
          T/M ERROR - -

          Transmission Fluid Temp High

          See Owner's Manual

          		 Illuminates Sounds

          Electronic Shift Lever System

        1. The combination meter assembly displays the following messages based on signals received from the ECM and shift control ECU.

          Message Master Warning Light Buzzer

          Shift system malfunction

          Apply parking brake securely when parking

          See owner's manual

          		 Illuminates Sounds

          P switch malfunction

          Apply parking brake securely when parking

          See owner's manual

          		 Illuminates Sounds

          Shift system unavailable

          Apply parking brake securely when parking

          See owner's manual

          		 Illuminates Sounds

          Shift system malfunction

          Stop in a safe place

          See owner's manual

          		 Illuminates Sounds

          Stop vehicle in a safe place

          Push P switch

          		 Illuminates Sounds

          Shift system malfunction

          See owner's manual

          		 Illuminates Sounds

          Shift system malfunction

          Shifting unavailable

          Drive to a safe place and stop

          		 Illuminates -

          Shift system malfunction

          Driving unavailable

          		 Illuminates -

          Shifted into N

          Vehicle must be in D to shift into M

          		 Illuminates -

          Shifted into N

          Vehicle must be stopped to shift into D

          		 Illuminates -

          Shifted into N

          Vehicle must be stopped to shift into R

          		 Illuminates -

          Shifted into N

          Vehicle must be stopped to shift into P

          		 Illuminates -
          Temporarily hold shift lever in N position to shift into N Illuminates -

          Shifting unavailable

          Wait a moment and Shift again

          		 Illuminates -

          Shifting was unavailable

          Shift again

          		 - -
          Engine must be started to shift - -
          Vehicle must be in D to shift into M - -
          Depress brake to shift - -
          Release accelerator to shift - -

          Tire Pressure Warning System

        1. The combination meter assembly displays the following messages based on signals received from the tire pressure warning ECU and receiver.

          Message Master Warning Light Buzzer

          TPWS malfunction

          Visit Your Dealer

          (and image display)

          		 - -
          Setting TPWS - -
          Registering Each TPWS Sensor - -

          Tire Pressure Low

          Check Tire

          (and image display)

          		 - -

          Brake System

        1. The combination meter assembly displays the following messages based on signals received from the skid control ECU assembly and pad wear indicators.

          Message Master Warning Light Buzzer

          Braking Power Low

          Stop in a Safe Place

          See Owner's Manual

          		 Blinks Sounds

          Antilock Brake System Malfunction

          Visit Your Dealer

          		 - Sounds

          Braking Power Low

          Visit Your Dealer

          		 - Sounds

          Brake Hold Fault

          Depress Brake to Deactivate

          Visit Your Dealer

          		 Illuminates Sounds

          Brake Hold Warning

          Depress Brake on Slope

          		 Blinks Sounds

          Brake Hold Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          Brake Hold Less Effective during Icy Conditions Illuminates Sounds

          Brake Hold Active

          Depress Brake and Switch to Deactivate

          		 - Sounds

          Brake Hold Unavailable

          Driver Door Open

          		 - Sounds

          Brake Hold Unavailable

          Driver Seat Belt Unbuckled

          		 - Sounds
          Depress Brake to Maintain Brake Hold - Sounds
          Close Driver Door to Maintain Brake Hold - Sounds
          Fasten Driver Seat Belt to Maintain Brake Hold - Sounds

          Brake Pad Wear.

          Visit Your Dealer

          		 Illuminates Sounds
          Check Secondary Collision Brake system Illuminates Sounds
          Traction Control Turned Off - -

          Electric Parking Brake (EPB) System

        1. The combination meter assembly displays the following messages based on signals received from the parking brake ECU assembly.

          Message Master Warning Light Buzzer

          EPB can't be released

          Close door and fasten your seatbelt

          		 Blinks -
          EPB applied Blinks -
          EPB Activation Stopped Incompletely Blinks Sounds

          EPB release unavailable

          Depress brake pedal for EPB release

          		 - -

          EPB frequently operated

          Wait a minute

          		 Blinks -
          EPB unavailable Illuminates Sounds

          EPB Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          EPB automatically applied - -
          EPB Shift Interlock Function Activated - Sounds
          EPB Shift Interlock Function Deactivated - Sounds

          Vehicle may roll out

          Park the vehicle on flat road

          		 Blinks Sounds

          Electric Power Steering (EPS) System

        1. The combination meter assembly displays the following messages based on signals received from the power steering ECU.

          Message Master Warning Light Buzzer

          Power Steering Malfunction Steering Power Low

          Visit Your Dealer

          		 Illuminates → Blinks Sounds

          Steering Power Low

          Visit Your Dealer

          		 Illuminates → Blinks Sounds

          Power Steering Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Engine Stopped

          Steering Power Low

          		 Illuminates Sounds

          Variable Gear Ratio Steering (VGRS) System (Models with VGRS)

        1. The combination meter assembly displays the following messages based on signals received from the front steering control ECU.

          Message Master Warning Light Buzzer
          VGRS TEST MODE - -

          VGRS Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Dynamic Rear Steering (DRS) System (Models with DRS)

        1. The combination meter assembly displays the following messages based on signals received from the rear steering control ECU.

          Message Master Warning Light Buzzer
          DRS TEST MODE - -

          DRS Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Sub-battery System

        1. The combination meter assembly displays the following messages based on signals received from the sub-battery ECU.

          Message Master Warning Light Buzzer

          Sub-Battery System Malfunction

          Visit Your Dealer

          		 Illuminates -

          Lexus Parking Assist-sensor System

        1. The combination meter assembly displays the following messages based on signals received from the clearance warning ECU assembly.

          Message Master Warning Light Buzzer

          Parking Assist Malfunction

          Visit Your Dealer

          		 Illuminates -

          Lexus parking assist-sensor system detection display

          (image display)

          		 - -
          Parking Assist Malfunction Illuminates -
          Clean Parking Assist Sensor Illuminates -

          Blind Spot Monitor System (Models with Blind Spot Monitor System)

        1. The combination meter assembly displays the following messages based on signals received from the blind spot monitor sensor RH.

          Message Master Warning Light Buzzer
          Blind Spot Monitor Unavailable Illuminates Sounds

          Blind Spot Monitor System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Entry and Start System

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU and certification ECU.

          Message Master Warning Light Buzzer
          Push and Hold Engine Switch for Emergency Stop Blinks Sounds
          Shift to N Position and Push Engine Switch to Restart Blinks Sounds
          Engine Stopped Shift to P Position Blinks Sounds
          Engine Stopped Stop in a Safe Place Blinks Sounds
          Shift to P Before Exiting Vehicle Blinks Sounds
          Auto Power Off to Conserve Battery - -
          Key Not Detected Check Key Location - Sounds

          Entry and Start System Malfunction

          See Owner's Manual

          		 Illuminates -
          Turn Off Vehicle Blinks -
          Key Detected in Vehicle - -
          Depress Brake Pedal and Touch Engine Switch with Key - Sounds
          Depress Brake Pedal and Push Engine Switch to Start -

          Sounds*1/

          Not Sounds*2
          - -
          - Sounds
          Push engine switch while turning steering wheel in either direction Blinks Sounds
          Key Battery Low Replace Key Battery - Sounds

          A New Key has been Registered

          Contact Your Dealer for Details

          		 - -

          *1: Engine Switch off

          *2: Engine Switch on (IG)


          Theft Deterrent System

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU.

          Message Master Warning Light Buzzer
          Theft Sensor Turned Off - -
          Theft Sensor Turned On - -

          Supplemental Restraint System (SRS) Airbag System

        1. The combination meter assembly displays the following messages based on signals received from the airbag ECU assembly.

          Message Master Warning Light Buzzer

          SRS Airbag System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Pop Up Hood System

        1. The combination meter assembly displays the following messages based on signals received from the pedestrian detection ECU assembly.

          Message Master Warning Light Buzzer

          POP UP HOOD Actuated

          Visit Your Dealer

          		 Illuminates Sounds

          POP UP HOOD Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Pre-collision System (Models with Lexus Safety System+)

        1. The combination meter assembly displays the following messages based on signals received from the driving support ECU assembly.

          Message Master Warning Light Buzzer
          ADJUSTING FRONT RADAR BEAM - -

          ADJUSTING FRONT RADAR BEAM

          ERROR

          		 - -

          ADJUSTING FRONT RADAR BEAM

          ALONG VERTICAL AXIS

          		 - -

          ADJUSTING FRONT RADAR BEAM

          ALONG HORIZONTAL AXIS

          		 - -

          CHECKING PCS

          BRAKE

          		 - -
          BRAKE! -

          -*

          Front Camera Unavailable - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -

          Pre-Collision System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          VSC Turned Off

          Pre-Collision Brake System Unavailable

          		 - -
          Pre-Collision System Unavailable - -

          Pre-Collision System Unavailable

          Clean Sensor

          		 - -
          Pre-Collision System Off - -

          *: A pre-collision city buzzer operation is activated.


          Air Conditioning System

        1. The combination meter assembly displays the following messages based on signals received from the air conditioning amplifier assembly.

          Message Master Warning Light Buzzer

          High Power Consumption

          Partial Limit On AC/Heater Operation

          		 Blinks -

          Power Window System

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU.

          Message Master Warning Light Buzzer
          Window Open Blinks Sounds

          Door

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU.

          Message Master Warning Light Buzzer

          Driver door open

          (image display)

          		 - -

          Front passenger door open

          (image display)

          Hood open

          (image display)

          Luggage compartment door open

          (image display)

          Driver door open while driving*

          (image display)

          		 Blinks Sounds

          Front passenger door open while driving*

          (image display)

          Hood open while driving*

          (image display)

          Luggage compartment door open while driving*

          (image display)

          *: If the vehicle has reached a speed of 3 mph (5 km/h).


          Wiper System

        1. The combination meter assembly displays the following messages based on signals received from the windshield wiper ECU.

          Message Master Warning Light Buzzer

          Wiper System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds

          Washer System

        1. The combination meter assembly displays the following messages based on signals received from the level warning switch assembly.

          Message Master Warning Light Buzzer
          Windshield Washer Fluid Low - -

          Lighting System

        1. The combination meter assembly displays the following messages based on signals received from the main body ECU.

          Message Master Warning Light Buzzer
          Turn Lights Off*1 Blinks Sounds

          Headlight System Uninitialized

          Visit Your Dealer

          		 - -

          Headlight System Malfunction

          Visit Your Dealer

          		 Illuminates Sounds
          To Activate Automatic High Beam, Switch Headlights to High Beam*2 - -
          Front Camera Unavailable - -

          Front Camera Vision Blocked

          Clean and Demist Windshield

          		 - -

          *1: Models with light reminder function

          *2: Models with Lexus Safety System+


          Active Rear Wing System (Models with Active Rear Wing System)

        1. The combination meter assembly displays the following messages based on signals received from the spoiler control ECU assembly.

          Message Master Warning Light Buzzer

          Active Rear Wing Malfunction.

          Visit Your Dealer

          		 - -

          Active Rear Wing Off.

          Go to Settings to turn On.

          		 - -

          Reminder Service/Operation Advisory Function

        1. The reminder service/operation advisory function displays the following setting change reminders and operation support displays via an interrupt display when conditions are met according to the vehicle condition and various switch operations.

          Reminder Details Display Condition Multi-information Display Choice
          Headlight illumination reminder When system determines vehicle is being driven at night with headlights turned off Turn On Headlamps -
          Turn headlights off after stopping reminder (when light control switch is not set to AUTO) When headlights are illuminated after engine switch is turned off (light control switch is in TAIL or HEAD position) Headlamps Are On -
          Turn headlights off after stopping reminder (when light control switch is set to AUTO) When headlights are illuminated after engine switch is turned off (light control switch is in AUTO position)

          Headlamps Are On

          Turn Headlamps Off?

          • Yes

          • No
          Close door windows during wiper operation reminder If any door window is open when attempting to operate wipers Close Windows?

          • Yes

          • No

    2. Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Entry and Start System Warning Buzzer 1 (Intermittent)
        2 Reverse Warning Buzzer (Intermittent*1/Once*2)
        3 Door Open when Shift Position not in P Warning Buzzer (Continuous)
        4 Driver Seat Belt Warning Buzzer (Once)
        5 Front Passenger Seat Belt Warning Buzzer (Once)
        6 Seat Belt Warning Level 2 Buzzer (Intermittent)
        7 Seat Belt Warning Level 1 Buzzer (Intermittent)
        8 P Position Operation Advice Buzzer (Once)
        9 Brake Force Reduction Warning Buzzer (Intermittent)
        10 Brake Fluid Low Warning Buzzer (Intermittent)
        11 EPS Warning Buzzer (Intermittent)
        12 Engine Switch Operation while Driving Warning Buzzer (Intermittent)
        13 Accelerator Depression Hold Warning Buzzer (Continuous)
        14 Emergency Stop Warning Buzzer (Continuous)
        15 Parking Brake Engaged Warning Buzzer (Intermittent)
        16 Brake System Temperature Rise Warning/Active Test Buzzer (Intermittent)
        17 Speed Limit Exceed Warning Buzzer (Intermittent)*3
        18 Electric Parking Brake System Cancel Warning Buzzer (Once)
        19 Speed Warning Buzzerl*4
        20 Engine Oil Pressure Warning Buzzer (Intermittent)
        21 Door Open while Driving Warning Buzzer (Intermittent)
        22 Entry and Start System Warning Buzzer 2 (Intermittent)
        23 Road Sign Assist System Warning Buzzer (Fourth)*5
        24 Low Speed Zone Leading Vehicle Lost Warning Buzzer (Fourth)*6
        25 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning Buzzer (Twice)*7
        26 Lane Departure Alert System*8 or Lane Keeping Assist System*9 Cancel Warning Buzzer (twice)
        27 EPS Warning Buzzer (Once)
        28 Lane Departure Alert Buzzer (Intermittent)*7
        29 Engine Coolant Temperature Warning Buzzer (Once)
        30 Multi-information Display Warning Buzzer (Once)
        31 Shift-by-wire Buzzer (Twice)
        32 Shift-by-wire Buzzer 1 (Once)
        33 Hands off Steering Wheel Warning Buzzer (Intermittent)*7
        34 Shift-by-wire Buzzer 2 (Once)
        35 Shift-by-wire Buzzer (Intermittent)
        36 Vehicle Sway Warning Buzzer (Twice)*7
        37 Light Reminder Buzzer (Continuous)*10
        38 Brake Hold System Control Not Release Warning Buzzer (Twice)
        39 Entry and Start System Warning Buzzer (Once)
        40 Immobiliser Certification Reminder Buzzer (Once)
        41 EPB Shift Interlock Function Activated Buzzer (Once)
        42 EPB Shift Interlock Function Deactivated Buzzer (Once)
        43 Turn Signal/Hazard Warning Operation Buzzer (Intermittent)

        *1: Destination package for Korea

        *2: Except destination package for Korea

        *3: Models for G.C.C. countries

        *4: Models for Europe

        *5: Models with road sign assist system

        *6: Models with Lexus Safety System+ with full-speed range following function

        *7: Models with Lexus Safety System+

        *8: Models with LDA system

        *9: Models with LKA system

        *10: Models with light reminder function

    3. Maintenance Required Reminder Function (Destination Package for Korea)


      1. The maintenance required reminder will appear to inform the driver of maintenance requirements. The maintenance required message is displayed on the multi-information display.

      2. The combination meter assembly calculates the vehicle driving distance based on signals from the skid control ECU assembly.

      3. There are 2 types of warnings: one is displayed when the accumulated vehicle driving distance is 9800 km or more since the last time the system was reset, and the other is displayed when the accumulated driving distance is 10000 km or more.

      4. The maintenance required reminder functions as follows:

        Warning Method 9800 km or more 10000 km or more
        Multi-information Display "Maintenance required soon" warning appears for approximately 15 seconds "Maintenance required Visit Your Dealer" warning remains on

      5. After the required maintenance has been performed, the accumulated vehicle driving distance memorized in the combination meter assembly should be reset to zero using the setting function displayed on multi-information display.

        Tech Tips

        After initialization is complete, "Initialization Completed" will be displayed on the multiinformation display.