THEFT DETERRENT


  1. FUNCTION


    1. The theft deterrent system has the following functions:

      Function Outline
      Alarm When the theft deterrent system switches to the alarm state, the warning items are operated and the alarm sounds for approximately 27.5 seconds.
      Alarm Indicator When the theft deterrent system switches to the armed preparation state or alarm state, the security indicator light is illuminated to inform the user. This indicator is also the immobiliser indicator, which blinks when the immobiliser is in the set state.
      Forced Door Lock

      The main body ECU transmits a door lock signal to all the doors when all the following conditions are met:


      • The theft deterrent system is in the alarm state.

      • There is no electrical key transmitter sub-assembly in the actuation area.

      • One of the doors has been unlocked.

      The function stops when one of the following conditions is met:


      • All doors are locked.

      • The warning ends after approximately 27.5 seconds.

      • The electrical key transmitter sub-assembly is in the actuation area.
      Panic Control* When the panic switch of the electrical key transmitter sub-assembly is pressed, the main body ECU operates the alarm function.

      *: Models with panic alarm function

  2. OPERATION


    1. The theft deterrent system can be set by locking the doors using any of the following operations:

      Door Lock Operation Vehicles Displaying Item "Security control with mechanism key" on Global TechStream (GTS) Vehicles not Displaying Item "Security control with mechanism key" on Global TechStream (GTS)
      Entry lock operation ○ ○
      Wireless lock operation ○ ○
      Key linked lock operation - ○
      Keyless lock operation* - ○

      ○: Available

      -: Not available

      *: Keyless lock operation is door lock operation without using the electrical key transmitter sub-assembly. First, set the lock position (door lock knob) when the door is open, and close the door while pulling the door handle to lock the door.

    2. The theft deterrent system can be canceled by unlocking the doors using any of the following operations:

      Door Unlock Operation Vehicles Displaying Item "Security control with mechanism key" on Global TechStream (GTS) Vehicles not Displaying Item "Security control with mechanism key" on Global TechStream (GTS)
      Entry unlock operation ○ ○
      Wireless unlock operation ○ ○
      Key linked unlock operation

      -

      (○)*

      		 ○

      ○: Available

      -: Not available

      *: For details, refer to the Repair Manual.

    3. The states of the theft deterrent system are as follows:

      State Description Theft Detection
      Disarmed State The theft deterrent system has not been set by the user. Not possible
      Armed Preparation State This is the preparation state before the theft deterrent system becomes active (enters the armed state) when the system has been set by the user. Not possible
      Armed State The theft deterrent system is active. (Theft can be detected.) Possible
      Alarm State A theft attempt has been detected and the warning operation activates. Possible
      B0049O9E06

    4. The theft deterrent system activates as shown in the diagram above when one of the items in the table occurs in order to cause the system to enter the respective state.

      Vehicles not Displaying Item "Security control with mechanism key" on Global TechStream (GTS)
      Condition Item
      (1)

      In disarmed state 1, when the power switch is off, the system state is switched if the following condition is met:


      • With all doors, the engine hood and the luggage compartment door closed, all doors are locked by a wireless operation, entry operation or key linked power door lock operation.

      In disarmed state 1, when the power switch is off, the engine hood and luggage compartment door are closed, and all doors are locked, the system state is switched if the following condition is met:


      • All doors are closed when any door is opened.
      (2) Allow approximately 30 seconds to elapse.
      (3)

      • All doors are unlocked by a wireless operation, entry operation or key linked power door lock operation.

      • Any door is unlocked.

      • Any door is opened.

      • The power switch is pushed.

      • The power switch is turned on (ACC) or on (IG).

      • The auxiliary battery is reconnected.
      (4)

      • The engine hood is opened when the engine hood is closed.

      • The luggage compartment door is opened when the luggage compartment door is closed.

      • The auxiliary battery is reconnected when the engine hood is open, luggage compartment door is open, any door is open or any door is unlock.

      • The intrusion sensor (theft warning ultrasonic sensor) detects movement within the vehicle.

      • Theft warning tilt sensor detects a change in the pitch angle of the vehicle inclination.

      • The glass breakage sensor detects that glass is broken.

      • Any door is opened when all doors are closed.

      • Any door is unlocked when all doors are locked.

      • When 5 seconds or more have elapsed after the power switch is pressed, the power source mode is changed from off to on (IG) without pressing the power switch.

      Note

      Ultrasonic waves are used to detect intrusion. Ultrasonic waves do not penetrate steel or glass. When any of the door windows is left open, ultrasonic waves may escape. This may result in the detection of people in the surroundings, leaves or insects entering the vehicle, strong wind or other ultrasonic wave sources in the environment when the vehicle is parked with the door windows open. When parking the vehicle with the door windows open for ventilation, turn off the intrusion sensor (theft warning ultrasonic sensor) using the intrusion sensor cancel switch.
      (5)

      • The power switch is turned on (READY).

      • All doors are unlocked by a wireless operation, entry operation or key linked power door lock operation.

      • The power switch is turned on (ACC) or on (IG) within 5 seconds of the power switch being pushed.
      (6) After approximately 27.5 seconds, the alarm stops and the system returns to the armed state.
      (7) The luggage compartment door is opened by a wireless operation or entry operation.
      (8)

      • The luggage compartment door is closed when the engine hood is closed.

      • The engine hood is closed when the luggage compartment door is closed.
      (9)

      • Any door is unlocked when all doors are locked.

      • Any door is opened.

      • The power switch is pushed.

      • The power switch is turned on (ACC) or on (IG).

      • The auxiliary battery is reconnected.

      • All doors are unlocked by a wireless operation, entry operation or key linked power door lock operation.
      (10)

      In disarmed state 1, when the power switch is off, the system state is switched if the following condition is met:


      • With all doors closed, and the engine hood and luggage compartment door opened, all doors are locked by a wireless operation, entry operation or key linked power door lock operation.

      In disarmed state 1, when the power switch is off, all doors are locked and the engine hood and luggage compartment door are open, the system state is switched if the following condition is met:


      • All doors are closed when any door is opened.
      (11)

      • The engine hood is opened.

      • The luggage compartment door is opened.

      • The luggage compartment door is opened by a wireless operation or entry operation
      Vehicles Displaying Item "Security control with mechanism key" on Global TechStream (GTS)
      Condition Item
      (1)

      In disarmed state 1, when the power switch is off, the system state is switched if the following condition is met:


      • With all doors, the engine hood and the luggage compartment door closed, all doors are locked by a wireless operation or entry operation.
      (2) Allow approximately 30 seconds to elapse.
      (3)

      • All doors are unlocked by a wireless operation or entry operation.

      • Any door is unlocked.

      • Any door is opened.

      • The power switch is pushed.

      • The power switch is turned on (ACC) or on (IG).

      • The auxiliary battery is reconnected.
      (4)

      • The engine hood is opened when the engine hood is closed.

      • The luggage compartment door is opened when the luggage compartment door is closed.

      • The auxiliary battery is reconnected when the engine hood is open, luggage compartment door is open, any door is open or any door is unlock.

      • The intrusion sensor (theft warning ultrasonic sensor) detects movement within the vehicle.

      • Theft warning tilt sensor detects a change in the pitch angle of the vehicle inclination.

      • The glass breakage sensor detects that glass is broken.

      • Any door is opened when all doors are closed.

      • Any door is unlocked when all doors are locked.

      • When 5 seconds or more have elapsed after the power switch is pressed, the power source mode is changed from off to on (IG) without pressing the power switch.

      • The engine hood is open.

      • Any door is open.

      • The power source mode is on (IG).

      Note

      Ultrasonic waves are used to detect intrusion. Ultrasonic waves do not penetrate steel or glass. When any of the door windows is left open, ultrasonic waves may escape. This may result in the detection of people in the surroundings, leaves or insects entering the vehicle, strong wind or other ultrasonic wave sources in the environment when the vehicle is parked with the door windows open. When parking the vehicle with the door windows open for ventilation, turn off the intrusion sensor (theft warning ultrasonic sensor) using the intrusion sensor cancel switch.
      (5)

      • The power switch is turned on (READY).

      • All doors are unlocked by a wireless operation or entry operation.
      (6) After approximately 27.5 seconds, the alarm stops and 5 seconds later the system returns to the armed state.
      (7) The luggage compartment door is opened by a wireless operation or entry operation.
      (8)

      • The luggage compartment door is closed when the engine hood is closed.

      • The engine hood is closed when the luggage compartment door is closed.
      (9)

      • Any door is unlocked when all doors are locked.

      • Any door is opened.

      • The power switch is pushed.

      • The power switch is turned on (ACC) or on (IG).

      • The auxiliary battery is reconnected.

      • All doors are unlocked by a wireless operation or entry operation.
      (10)

      In disarmed state 1, when the power switch is off, the system state is switched if the following condition is met:


      • With all doors closed, and the engine hood or luggage compartment door opened, all doors are locked by a wireless operation or entry operation.
      (11)

      • The engine hood is opened.

      • The luggage compartment door is opened.

      • The luggage compartment door is opened by a wireless operation or entry operation